Hiya folks, Recently we've had a lot of people ask about recommended server specs for Koha. This is a tough question to answer because it comes loaded with assumptions about the size of the collection, transaction load, etc. So I was wondering if those of you who are running Koha in your libraries could just post a quick email to the list saying how large your collection is, number of transactions, what server specs you use (proc speed, RAM, disk space, etc.), and how the performance has been for you ... and then we can compile that as part of the FAQ. Cheers, -- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE President, Technology migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
Am 19.01.2008 um 17:21 schrieb Joshua Ferraro:
post a quick email to the list saying how large your collection is, number of transactions, what server specs you use (proc speed, RAM, disk space, etc.), and how the performance has been for you ...
www.backstage-books.de About 5000 books, videos, recordings, plans and so on, planning to grow. About 10 transactions per week, we are moving once again and hope this will increase in future. Our server is a Pentium2 at 120MHz, 128MB RAM, 30GB HD The OS is FreeBSD 6.2 The performance is quite good for the machine, but compared to a normal webserver rather poor. With Koha 3.0 we'll also move the server to a better machine, but it works at the moment. Dorian Meid
Collection - 55000, average transactions (issue/return) 500 per day, Production Server Specs - CentOS 4, 1.8 Gig Proc, 1GB RAM, 80 GB HDD. Perfomance fair with Koha 2.2.9 (which in production) - excellent with Koha 3 with lower specs in (still in development). Production server is not exclusive to Koha. ----------------------------------- Bernard Shiundu Systems Librarian Strathmore University Library
-----Original Message----- From: koha-devel-bounces+bshiundu=strathmore.edu@nongnu.org [mailto:koha- devel-bounces+bshiundu=strathmore.edu@nongnu.org] On Behalf Of Joshua Ferraro Sent: Saturday, January 19, 2008 7:22 PM To: Koha-devel@nongnu.org; koha@lists.katipo.co.nz Subject: [Koha-devel] What Server Specs do YOU run Koha on?
Hiya folks,
Recently we've had a lot of people ask about recommended server specs for Koha. This is a tough question to answer because it comes loaded with assumptions about the size of the collection, transaction load, etc. So I was wondering if those of you who are running Koha in your libraries could just post a quick email to the list saying how large your collection is, number of transactions, what server specs you use (proc speed, RAM, disk space, etc.), and how the performance has been for you ... and then we can compile that as part of the FAQ.
Cheers,
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE President, Technology migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
_______________________________________________ Koha-devel mailing list Koha-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/koha-devel
We are just getting involved with Koha and are not in production yet, which is why we are starting with version 3.0 alpha. We have 8 Mac minis (Intel duo core processors with 1GB of RAM) each with 60GB hard drives that were purchased for another project that ended abrubtly. I have installed Ubuntu 7.10 on two of these machines so far and have successfully brought up one of the machines. I still need to do some tweaks on a second machine to get Zebra to work properly. John +----------------------------------------------------------------------- --+ John Chadwick, Ed.D. Information Technology Manager New Mexico State Library 1209 Camino Carlos Rey Santa Fe, NM 87507 Phone: 505-476-9740 Cell: 505-629-8116 Fax: 505-476-9761 john.chadwick@state.nm.us http://www.stlib.state.nm.us -----Original Message----- From: koha-devel-bounces+john.chadwick=state.nm.us@nongnu.org [mailto:koha-devel-bounces+john.chadwick=state.nm.us@nongnu.org] On Behalf Of Joshua Ferraro Sent: Saturday, January 19, 2008 9:22 AM To: Koha-devel@nongnu.org; koha@lists.katipo.co.nz Subject: [Koha-devel] What Server Specs do YOU run Koha on? Hiya folks, Recently we've had a lot of people ask about recommended server specs for Koha. This is a tough question to answer because it comes loaded with assumptions about the size of the collection, transaction load, etc. So I was wondering if those of you who are running Koha in your libraries could just post a quick email to the list saying how large your collection is, number of transactions, what server specs you use (proc speed, RAM, disk space, etc.), and how the performance has been for you ... and then we can compile that as part of the FAQ. Cheers, -- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE President, Technology migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS _______________________________________________ Koha-devel mailing list Koha-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/koha-devel ______________________________________________________________________ This inbound email has been scanned by the MessageLabs Email Security System. ______________________________________________________________________ Confidentiality Notice: This e-mail, including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. -- This email has been scanned by the Sybari - Antigen Email System.
begin { horn_tooting } For Washington County School District Koha: Customized 2.2.5 install Moved marc_word and marc_subfield_table to mysql InnoDB engine Semi-Dynamic link to MSSQL 2005 based Student Information System for Patron Info 5 Elementary Branches 4 Secondary Branches 2 Office Branches Biblios: 49888 Items: 97419 Approx. Issues / Month (Oct.): 13747 Approx. Issues / Year: 103346 Frontend: Dell PowerEdge 2950 2 Core 2 Duo Xeon @ 2 Ghz 4 Gb RAM 60 Gb Hard Drive Raid1 SAS Backend: 2 Dell PowerEdge 2850 Fail-over cluster shared with other software 2 Core Duo Xeon @ 2.8 Ghz 4 Gb RAM 2 FC NIC Fail-over to SAN based 100Gb Raid5 SAS Rarely a catalog search will take a couple minutes. Other than that it's great. This hardware will also run Koha 3 as soon as I'm happy with it and have ported some of my customizations. I'll put Zebra on the frontend. On Sat, 2008-01-19 at 11:21 -0500, Joshua Ferraro wrote:
Hiya folks,
Recently we've had a lot of people ask about recommended server specs for Koha. This is a tough question to answer because it comes loaded with assumptions about the size of the collection, transaction load, etc. So I was wondering if those of you who are running Koha in your libraries could just post a quick email to the list saying how large your collection is, number of transactions, what server specs you use (proc speed, RAM, disk space, etc.), and how the performance has been for you ... and then we can compile that as part of the FAQ.
Cheers,
Hello, At CCFLS our server has 80gb disk space with dual 2.0ghz processors and 6gb memory. Presently we have about 120,000 items in the collection between two libraries with about 800 circs per day total. Server performance has been good. Occasionally we experience slow responsiveness, but that seems to be due to either a slow Internet connection at the branch library or occasional issues with our thin clients. Cindy ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cindy Murdock Network Administrator Meadville Public Library | CCFLS http://meadvillelibrary.org | http://ccfls.org Joshua Ferraro wrote:
Hiya folks,
Recently we've had a lot of people ask about recommended server specs for Koha. This is a tough question to answer because it comes loaded with assumptions about the size of the collection, transaction load, etc. So I was wondering if those of you who are running Koha in your libraries could just post a quick email to the list saying how large your collection is, number of transactions, what server specs you use (proc speed, RAM, disk space, etc.), and how the performance has been for you ... and then we can compile that as part of the FAQ.
Cheers,
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cindy Murdock Network Administrator Meadville Public Library | CCFLS http://meadvillelibrary.org | http://ccfls.org
participants (6)
-
Bernard Shiundu -
Chadwick, John, DCA -
Cindy Murdock -
Dorian Meid -
Joshua Ferraro -
Michael Hafen