[Koha-cvs] CVS: koha/misc Install.pm,1.55,1.56
MJ Ray
slef at users.sourceforge.net
Wed Oct 22 16:48:10 CEST 2003
Update of /cvsroot/koha/koha/misc
In directory sc8-pr-cvs1:/tmp/cvs-serv25043
Modified Files:
Install.pm
Log Message:
A lot of wording rewritten
Index: Install.pm
===================================================================
RCS file: /cvsroot/koha/koha/misc/Install.pm,v
retrieving revision 1.55
retrieving revision 1.56
diff -C2 -r1.55 -r1.56
*** Install.pm 20 Oct 2003 19:16:50 -0000 1.55
--- Install.pm 22 Oct 2003 14:48:08 -0000 1.56
***************
*** 122,151 ****
my $messages;
! $messages->{'continuing'}->{en}="Great! Continuing setup.\n\n";
$messages->{'WelcomeToKohaInstaller'}->{en} =
heading('Welcome to the Koha Installer') . qq|
! Welcome to the Koha install script! This script will prompt you for some
! basic information about your desired setup, then install Koha for you.
!
! If you want to install the Koha configuration file somewhere other than /etc
! (eg for non-root installation, or multiple Koha versions on one system), you
! should set the etcdir and prefix environment variables. If this is your
! only koha installation on this machine and you are running this as root, the
! default should be OK.
!
! To accept the default value for any question, simply hit Enter at the prompt.
!
! Please be sure to read the documentation, or visit the Koha website at
! http://www.koha.org for more information.
Are you ready to begin the installation? ([Y]/N): |;
$messages->{'ReleaseCandidateWarning'}->{en} =
heading('RELEASE CANDIDATE') . qq|
! WARNING WARNING WARNING WARNING WARNING
!
! You are about to install Koha version %s. This version of Koha is a
! release candidate. It is not intended to be installed on production systems.
It is being released so that users can test it before we release a final
! version.
Are you sure you want to install Koha %s? (Y/[N]): |;
--- 122,153 ----
my $messages;
! $messages->{'continuing'}->{en}="Great! Continuing...\n\n";
$messages->{'WelcomeToKohaInstaller'}->{en} =
heading('Welcome to the Koha Installer') . qq|
! This program will ask some questions and try to install koha for you.
! You need to know: where most koha files should be stored (you can set
! the prefix environment variable for this); the username and password of
! a mysql superuser; and details of your library setup. You may also need
! to know details of your Apache setup.
!
! If you want to install the Koha configuration files somewhere other than
! /etc (for multiple Koha versions on one system, for example), you should
! set the etcdir environment variable. Please look at your manuals for
! details of how to set that.
!
! Recommended answers are given in brackets after each question. To accept
! the default value for any question (indicated by []), simply hit Enter
! at the prompt.
Are you ready to begin the installation? ([Y]/N): |;
+
$messages->{'ReleaseCandidateWarning'}->{en} =
heading('RELEASE CANDIDATE') . qq|
! WARNING: You are about to install Koha version %s. This is a
! release candidate, not intended for production systems.
It is being released so that users can test it before we release a final
! version and report bugs to us.
!
! Most people should answer Yes here.
Are you sure you want to install Koha %s? (Y/[N]): |;
***************
*** 168,182 ****
perl -MCPAN -e 'install Net::Z3950'
! IMPORTANT NOTE : If you use PERL5.8.0 (RedHat 8.0 or Mandrake 9.x), you MUST install
! manually the Net::Z3950 and edit Makefile.PL and yazwrap/Makefile.PL to include:
'DEFINE' => '-D_GNU_SOURCE',
Also note that some installations of Perl on Red Hat will generate a lot of
"'my_perl' undeclared" errors when running make in Net-Z3950. This is fixed by
! inserting the following line in yazwrap/ywpriv.h :
! #include "XSUB.h"
Press the <ENTER> key to continue: |; #'
! $messages->{'CheckingPerlModules'}->{en} = heading('PERL & MODULES') . qq|
Checking perl modules ...
|;
--- 170,187 ----
perl -MCPAN -e 'install Net::Z3950'
! ...or by installing packages for your distribution, if available.
!
! IMPORTANT NOTE : If you use Perl 5.8.0, you might need to
! edit NET::Z3950's Makefile.PL and yazwrap/Makefile.PL to include:
!
'DEFINE' => '-D_GNU_SOURCE',
+
Also note that some installations of Perl on Red Hat will generate a lot of
"'my_perl' undeclared" errors when running make in Net-Z3950. This is fixed by
! inserting in yazwrap/ywpriv.h a line saying #include "XSUB.h"
Press the <ENTER> key to continue: |; #'
! $messages->{'CheckingPerlModules'}->{en} = heading('PERL MODULES') . qq|
Checking perl modules ...
|;
***************
*** 187,191 ****
You are missing some Perl modules which are required by Koha.
Once these modules have been installed, rerun this installer.
! They can be installed by running (as root) the following:
%s
--- 192,196 ----
You are missing some Perl modules which are required by Koha.
Once these modules have been installed, rerun this installer.
! They may be installed by running (as root) the following:
%s
***************
*** 193,197 ****
$messages->{'AllPerlModulesInstalled'}->{en} =
! heading('ALL PERL MODULES INSTALLED') . qq|
All mandatory perl modules are installed.
--- 198,202 ----
$messages->{'AllPerlModulesInstalled'}->{en} =
! heading('PERL MODULES AVAILABLE') . qq|
All mandatory perl modules are installed.
***************
*** 201,206 ****
$messages->{'KohaAlreadyInstalled'}->{en} =
heading('Koha already installed') . qq|
! It looks like Koha is already installed on your system (%s/koha.conf exists
! already). If you would like to upgrade your system to %s, please use
the koha.upgrade script in this directory.
--- 206,211 ----
$messages->{'KohaAlreadyInstalled'}->{en} =
heading('Koha already installed') . qq|
! It looks like Koha is already installed on your system (%s/koha.conf exists).
! If you would like to upgrade your system to %s, please use
the koha.upgrade script in this directory.
***************
*** 215,240 ****
$messages->{'GetIntranetDir'}->{en} =
! heading('INTRANET/LIBRARIANS DIRECTORY') . qq|
! Please supply the directory you want Koha to store its Intranet/Librarians
files in. This directory will be auto-created for you if it doesn't exist.
Intranet Directory [%s]: |; #'
! $messages->{'GetKohaLogDir'}->{en} = heading('KOHA LOG DIRECTORY') . qq|
! Specify a log directory where any Koha daemons can create log files.
Koha Log Directory [%s]: |;
$messages->{'AuthenticationWarning'}->{en} = heading('Authentication') . qq|
! This release of Koha has a new authentication module. If you are not already
! using basic authentication on your intranet, you will be required to log in to
! access some of the features of the intranet.
IMPORTANT: You can log in using the userid and password from the %s/koha.conf configuration file at any time.
! Use the "Members" module to add passwords for other accounts and set their permissions.
Press the <ENTER> key to continue: |;
! $messages->{'Completed'}->{en} = heading('KOHA INSTALLATION COMPLETE') . qq|
Congratulations ... your Koha installation is complete!
--- 220,245 ----
$messages->{'GetIntranetDir'}->{en} =
! heading('LIBRARIAN DIRECTORY') . qq|
! Please supply the directory you want Koha to store its Librarian interface
files in. This directory will be auto-created for you if it doesn't exist.
Intranet Directory [%s]: |; #'
! $messages->{'GetKohaLogDir'}->{en} = heading('LOG DIRECTORY') . qq|
! Specify a directory where log files will be written.
Koha Log Directory [%s]: |;
$messages->{'AuthenticationWarning'}->{en} = heading('Authentication') . qq|
! This release of Koha has a new authentication module.
! You will be required to log in to
! access some features.
IMPORTANT: You can log in using the userid and password from the %s/koha.conf configuration file at any time.
! Use the "Members" screen to add passwords for other accounts and set their flags.
Press the <ENTER> key to continue: |;
! $messages->{'Completed'}->{en} = heading('INSTALLATION COMPLETE') . qq|
Congratulations ... your Koha installation is complete!
***************
*** 242,254 ****
http://%s\:%s/
- use mysql login and password to connect to this interface. Then, go to admin page, and create whatever fits your needs.
! and the OPAC interface at :
! http://%s\:%s/
! Be sure to read the Hints file.
! For more information visit http://www.koha.org
Press <ENTER> to exit the installer: |;
--- 247,258 ----
http://%s\:%s/
! use the koha admin mysql login and password to connect to this interface.
! and the OPAC interface at:
! http://%s\:%s/
! Please read the Hints file and visit http://www.koha.org
Press <ENTER> to exit the installer: |;
***************
*** 749,764 ****
$messages->{'NoUsrBinPerl'}->{en} =
! heading('Perl is not located in /usr/bin/perl') . qq|
! The Koha perl scripts expect to find the perl executable in the /usr/bin
directory. It is not there on your system.
|;
! $messages->{'AskLocationOfPerlExecutable'}->{en}=qq|Location of Perl Executable: [%s]: |;
$messages->{'ConfirmPerlExecutableSymlink'}->{en}=qq|
! The Koha scripts will _not_ work without a symlink from %s to /usr/bin/perl
! May I create this symlink? ([Y]/N):
! : |;
$messages->{'DirFailed'}->{en} = RED.qq|
--- 753,769 ----
$messages->{'NoUsrBinPerl'}->{en} =
! heading('No /usr/bin/perl') . qq|
! Koha expects to find the perl executable in the /usr/bin
directory. It is not there on your system.
|;
! $messages->{'AskLocationOfPerlExecutable'}->{en}=qq|Location of Perl Executable [%s]: |;
$messages->{'ConfirmPerlExecutableSymlink'}->{en}=qq|
! Some Koha scripts will _not_ work without a symlink from %s to /usr/bin/perl
! Most users should answer Y here.
!
! May I try to create this symlink? ([Y]/N):|;
$messages->{'DirFailed'}->{en} = RED.qq|
***************
*** 854,874 ****
=cut
! $messages->{'DatabaseName'}->{en} = heading('Name of MySQL database') . qq|
Please provide the name that you wish to give your koha database.
It must not exist already on the database server.
Database name [%s]: |;
$messages->{'DatabaseHost'}->{en} = heading('Database Host') . qq|
! Please provide the hostname for mysql. Unless the database is located on
! another machine this will be "localhost".
Database host [%s]: |;
$messages->{'DatabaseUser'}->{en} = heading('Database User') . qq|
! Please provide the name of the user who will have full administrative rights
! to the %s database, when authenticating from %s.
! This user will also be used to access Koha's INTRANET interface.
Database user [%s]: |;
--- 859,882 ----
=cut
! $messages->{'DatabaseName'}->{en} = heading('Database Name') . qq|
Please provide the name that you wish to give your koha database.
It must not exist already on the database server.
+ Most users give a short single-word name for their library here.
+
Database name [%s]: |;
$messages->{'DatabaseHost'}->{en} = heading('Database Host') . qq|
! Please provide the mysql server name. Unless the database is stored on
! another machine, this should be "localhost".
Database host [%s]: |;
$messages->{'DatabaseUser'}->{en} = heading('Database User') . qq|
! We are going to create a new mysql user for Koha. This user will have full administrative rights
! to the database called %s when they connect from %s.
! This is also the name of the Koha librarian superuser.
! Most users give a single-word name here.
Database user [%s]: |;
***************
*** 877,881 ****
Please provide a good password for the user %s.
! IMPORTANT: You can log in using this userid and password at any time.
Password for database user %s: |;
--- 885,889 ----
Please provide a good password for the user %s.
! IMPORTANT: You can log in using this user and password at any time.
Password for database user %s: |;
***************
*** 937,946 ****
$messages->{'FoundMultipleApacheConfFiles'}->{en} =
! heading('MULTIPLE APACHE CONFIG FILES') . qq|
I found more than one possible Apache configuration file:
%s
! Choose the correct file [1]: |;
$messages->{'NoApacheConfFiles'}->{en} =
--- 945,954 ----
$messages->{'FoundMultipleApacheConfFiles'}->{en} =
! heading('MULTIPLE APACHE CONFIG FILES FOUND') . qq|
I found more than one possible Apache configuration file:
%s
! Enter number of the file to read [1]: |;
$messages->{'NoApacheConfFiles'}->{en} =
***************
*** 948,954 ****
I was not able to find your Apache configuration file.
! The file is usually called httpd.conf or apache.conf.
! Please specify the location of your config file: |;
$messages->{'NotAFile'}->{en} = heading('FILE DOES NOT EXIST') . qq|
--- 956,962 ----
I was not able to find your Apache configuration file.
! The file is usually called httpd.conf, apache.conf or similar.
! Please enter the full name, starting with /: |;
$messages->{'NotAFile'}->{en} = heading('FILE DOES NOT EXIST') . qq|
***************
*** 958,970 ****
$messages->{'EnterApacheUser'}->{en} = heading('NEED APACHE USER') . qq|
! The installer could not find the user that Apache is running as.
! This is used to set up access permissions of
! %s/koha.conf. This user should be set in one of the Apache configuration
! files with the "User" line.
! Please try to find it and enter the user name below.
Enter the Apache userid: |;
! $messages->{'InvalidUserid'}->{en} = heading('INVALID USERID') . qq|
The userid %s is not a valid userid on this system.
--- 966,978 ----
$messages->{'EnterApacheUser'}->{en} = heading('NEED APACHE USER') . qq|
! The installer could not find the User setting in the Apache configuration file.
! This is used to set up access permissions for
! %s/koha.conf. This user should be set in one of the Apache configuration.
! Please try to find it and enter the user name below. You might find
! that "ps u|grep apache" will tell you. It probably is NOT "root".
Enter the Apache userid: |;
! $messages->{'InvalidUserid'}->{en} = heading('INVALID USER') . qq|
The userid %s is not a valid userid on this system.
***************
*** 1061,1070 ****
heading('APACHE CONFIGURATION') . qq|
Koha needs to write an Apache configuration file for the
! OPAC and LIBRARIAN virtual hosts. By default this installer
! will do this by using one ip address and two different ports
for the virtual hosts. There are other ways to set this up,
and the installer will leave comments in
! %s/koha-httpd.conf detailing
! what these other options are.
NOTE: You will need to add lines to your main httpd.conf to
--- 1069,1077 ----
heading('APACHE CONFIGURATION') . qq|
Koha needs to write an Apache configuration file for the
! OPAC and Librarian sites. By default this installer
! will do this by using one name and two different ports
for the virtual hosts. There are other ways to set this up,
and the installer will leave comments in
! %s/koha-httpd.conf about them.
NOTE: You will need to add lines to your main httpd.conf to
***************
*** 1076,1087 ****
$messages->{'GetVirtualHostEmail'}->{en} =
! heading('WEB SERVER E-MAIL CONTACT') . qq|
! Enter the e-mail address to be used as a contact for the virtual hosts (this
! address is displayed if any errors are encountered).
E-mail contact [%s]: |;
$messages->{'GetServerName'}->{en} =
! heading('WEB SERVER HOST NAME OR IP ADDRESS') . qq|
Please enter the host name or IP address that you wish to use for koha.
Normally, this should be a name or IP that belongs to this machine.
--- 1083,1094 ----
$messages->{'GetVirtualHostEmail'}->{en} =
! heading('WEB E-MAIL CONTACT') . qq|
! Enter the e-mail address to be used as a contact for Koha. This
! address is displayed if fatal errors are encountered.
E-mail contact [%s]: |;
$messages->{'GetServerName'}->{en} =
! heading('WEB HOST NAME OR IP ADDRESS') . qq|
Please enter the host name or IP address that you wish to use for koha.
Normally, this should be a name or IP that belongs to this machine.
***************
*** 1089,1102 ****
Host name or IP Address [%s]: |;
! $messages->{'GetOpacPort'}->{en} = heading('OPAC VIRTUAL HOST PORT') . qq|
Please enter the port for your OPAC interface. This defaults to port 80, but
! if you are already serving web content from this host, you should change it
! to a different port (8000 might be a good choice).
Enter the OPAC Port [%s]: |;
$messages->{'GetIntranetPort'}->{en} =
! heading('INTRANET VIRTUAL HOST PORT') . qq|
! Please enter the port for your Intranet interface. This must be different from
the OPAC port (%s).
--- 1096,1109 ----
Host name or IP Address [%s]: |;
! $messages->{'GetOpacPort'}->{en} = heading('OPAC PORT') . qq|
Please enter the port for your OPAC interface. This defaults to port 80, but
! if you are already serving web content with this hostname, you should change it
! to a different port (8000 might be a good choice, but check any firewalls).
Enter the OPAC Port [%s]: |;
$messages->{'GetIntranetPort'}->{en} =
! heading('LIBRARIAN PORT') . qq|
! Please enter the port for your Librarian interface. This must be different from
the OPAC port (%s).
***************
*** 1155,1160 ****
heading('APACHE CONFIGURATION NEEDS UPDATE') . qq|
Koha uses the mod_env and mod_include apache features, but the
! installer did not find statements for them in your config. Please
! make sure that they are enabled for your Koha host.
Press <ENTER> to continue: |;
--- 1162,1167 ----
heading('APACHE CONFIGURATION NEEDS UPDATE') . qq|
Koha uses the mod_env and mod_include apache features, but the
! installer did not find them in your config. Please
! make sure that they are enabled for your Koha site.
Press <ENTER> to continue: |;
***************
*** 1163,1168 ****
$messages->{'ApacheAlreadyConfigured'}->{en} =
heading('APACHE ALREADY CONFIGURED') . qq|
! %s appears to already have an entry for Koha
! Virtual Hosts. You may need to edit %s
if anything has changed since it was last set up. This
script will not attempt to modify an existing Koha apache
--- 1170,1174 ----
$messages->{'ApacheAlreadyConfigured'}->{en} =
heading('APACHE ALREADY CONFIGURED') . qq|
! %s appears to already have an entry for Koha. You may need to edit %s
if anything has changed since it was last set up. This
script will not attempt to modify an existing Koha apache
***************
*** 1279,1293 ****
$messages->{'IntranetAuthenticationQuestion'}->{en} =
! heading('INTRANET AUTHENTICATION') . qq|
! I can set it up so that the Intranet/Librarian site is password protected using
! Apache's Basic Authorization.
! This is going to be phased out very soon. However, setting this up can provide
! an extra layer of security before the new authentication system is completely
! in place.
! Would you like to do this ([Y]/N): |; #'
! $messages->{'BasicAuthUsername'}->{en}="Please enter a userid for intranet access [%s]: ";
$messages->{'BasicAuthPassword'}->{en}="Please enter a password for %s: ";
$messages->{'BasicAuthPasswordWasBlank'}->{en}="\nYou cannot use a blank password!\n\n";
--- 1285,1297 ----
$messages->{'IntranetAuthenticationQuestion'}->{en} =
! heading('LIBRARIAN AUTHENTICATION') . qq|
! The Librarian site can be password protected using
! Apache's Basic Authorization instead of Koha user details.
! This method going to be phased out very soon. Most users should answer N here.
! Would you like to do this (Y/[N]): |; #'
! $messages->{'BasicAuthUsername'}->{en}="Please enter a username for librarian access [%s]: ";
$messages->{'BasicAuthPassword'}->{en}="Please enter a password for %s: ";
$messages->{'BasicAuthPasswordWasBlank'}->{en}="\nYou cannot use a blank password!\n\n";
***************
*** 1295,1299 ****
sub basicauthentication {
my $message=getmessage('IntranetAuthenticationQuestion');
! my $answer=showmessage($message, 'yn', 'y');
my $httpdconf = $etcdir."/koha-httpd.conf";
--- 1299,1303 ----
sub basicauthentication {
my $message=getmessage('IntranetAuthenticationQuestion');
! my $answer=showmessage($message, 'yn', 'n');
my $httpdconf = $etcdir."/koha-httpd.conf";
***************
*** 1441,1445 ****
$messages->{'MysqlRootPassword'}->{en} =
heading('MYSQL ROOT USER PASSWORD') . qq|
! To allow us to create the koha database please enter your
mysql server's root user password:
--- 1445,1449 ----
$messages->{'MysqlRootPassword'}->{en} =
heading('MYSQL ROOT USER PASSWORD') . qq|
! To create the koha database, please enter your
mysql server's root user password:
***************
*** 1454,1466 ****
heading('ERROR CREATING DATABASE') . qq|
Couldn't connect to the MySQL server for the reason given above.
! This is a serious problem, the database will not get installed.
Press <ENTER> to continue: |; #'
$messages->{'SampleData'}->{en} = heading('SAMPLE DATA') . qq|
! If you are installing Koha for evaluation purposes, I have a batch of sample
! data that you can install now.
! If you are installing Koha with the intention of populating it with your own
data, you probably don't want this sample data installed.
--- 1458,1470 ----
heading('ERROR CREATING DATABASE') . qq|
Couldn't connect to the MySQL server for the reason given above.
! This is a serious problem, the database will not get installed.
Press <ENTER> to continue: |; #'
$messages->{'SampleData'}->{en} = heading('SAMPLE DATA') . qq|
! If you are installing Koha for evaluation purposes,
! you can install some sample data now.
! If you are installing Koha to use your own
data, you probably don't want this sample data installed.
***************
*** 1473,1477 ****
http://bugs.koha.org/. If you need help with testing Koha, you can post a
question through the koha-devel mailing list, or you can check for a developer
! online at +irc.katipo.co.nz:6667 channel #koha.
You can find instructions for subscribing to the Koha mailing lists at:
--- 1477,1481 ----
http://bugs.koha.org/. If you need help with testing Koha, you can post a
question through the koha-devel mailing list, or you can check for a developer
! online at irc.katipo.co.nz:6667 channel #koha.
You can find instructions for subscribing to the Koha mailing lists at:
***************
*** 1483,1487 ****
$messages->{'AddBranchPrinter'}->{en} = heading('Add Branch and Printer') . qq|
! Would you like to install an initial branch and printer? [Y]/N: |;
$messages->{'BranchName'}->{en}="Branch Name [%s]: ";
--- 1487,1491 ----
$messages->{'AddBranchPrinter'}->{en} = heading('Add Branch and Printer') . qq|
! Would you like to describe an initial branch and printer? [Y]/N: |;
$messages->{'BranchName'}->{en}="Branch Name [%s]: ";
***************
*** 1564,1569 ****
$messages->{'UpdateMarcTables'}->{en} =
! heading('UPDATING MARC FIELD DEFINITION TABLES') . qq|
! You can import marc parameters for :
1 MARC21
--- 1568,1573 ----
$messages->{'UpdateMarcTables'}->{en} =
! heading('MARC FIELD DEFINITIONS') . qq|
! You can import MARC settings for:
1 MARC21
***************
*** 1571,1593 ****
N none
! Please choose which parameter you want to install. Note if you choose N,
! nothing will be added, and it can be a BIG job to manually create those tables
Choose MARC definition [1]: |;
! $messages->{'Language'}->{en} = heading('CHOOSE LANGUAGES') . qq|
This version of koha supports a few languages.
- Enter your language preference : either en, fr, es, pl or zh_TW
! Note that the en is always choosen when the system does not finds the
! language you choose in a specific screen.
! fr : all is translated (except pictures)
! es : a few intranet is translated (including pictures)
! pl : OPAC and a few intranet is translated
! zh_TW : partial translation
! Whether you specify a language here, you can always go to the
! intranet interface and change it from the system preferences.
Which language do you choose? |;
--- 1575,1598 ----
N none
! NOTE: If you choose N,
! nothing will be added, and you must create them all yourself.
! Only choose N if you want to use a MARC format not listed here,
! such as DANMARC. We would like to hear from you if you do.
Choose MARC definition [1]: |;
! $messages->{'Language'}->{en} = heading('CHOOSE LANGUAGE') . qq|
This version of koha supports a few languages.
! en : default language, all pages available
! fr : complete translation (except pictures)
! es : partial librarian site translation (including pictures)
! pl : complete OPAC and partial librarian translation
! zh_TW : partial translation
! en is used when a screen is not available in your language
! If you specify a language here, you can still
! change it from the system preferences screen in the librarian sit.
Which language do you choose? |;
More information about the Koha-cvs
mailing list