[Koha-devel] Zebra: the 'elements zebra::snippet' doesn't work

[David Cook]

I've received a reply from Adam at IndexData. He's looked into the problem
and has added a fix as part of YAZ 5.20.0. 

David Cook
Systems Librarian
Prosentient Systems
72/330 Wattle St
Ultimo, NSW 2007
Australia

Office: 02 9212 0899
Direct: 02 8005 0595


> -----Original Message-----
> From: koha-devel-bounces at lists.koha-community.org [mailto:koha-devel-
> bounces at lists.koha-community.org] On Behalf Of David Cook
> Sent: Tuesday, 10 January 2017 12:06 PM
> To: 'Tajoli Zeno' <z.tajoli at cineca.it>
> Cc: 'koha-devel' <koha-devel at lists.koha-community.org>
> Subject: Re: [Koha-devel] Zebra: the 'elements zebra::snippet' doesn't
work
> 
> I have a solution for this.
> 
> I feel like I've shared the solution before, but I can't find a record of
it, so I've
> opened the bug
> https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17871 and I'm
> sharing it here.
> 
> The bug report has most of the details, so I'll just summarize by saying
that I
> think there's in YAZ introduced in version 5.8.1, but we can workaround it
by
> changing our Zebra configuration.
> 
> If we remove the line <retrieval syntax="xml" name="zebra::*" /> and
restart
> Zebra, you should be able to use zebra::snippet and zebra::facet. At the
> moment, with that line, we can't get facets from Zebra, as I think it
causes
> some problems in YAZ and thus in Zebra. I'm going to get in touch with
> Indexdata about it.
> 
> In the meantime, I hope this is helpful.
> 
> David Cook
> Systems Librarian
> Prosentient Systems
> 72/330 Wattle St
> Ultimo, NSW 2007
> Australia
> 
> Office: 02 9212 0899
> Direct: 02 8005 0595
> 
> 
> > -----Original Message-----
> > From: Tajoli Zeno [mailto:z.tajoli at cineca.it]
> > Sent: Thursday, 28 January 2016 4:16 AM
> > To: David Cook <dcook at prosentient.com.au>
> > Cc: koha-devel <koha-devel at lists.koha-community.org>
> > Subject: Re: [Koha-devel] Zebra: the 'elements zebra::snippet' doesn't
> work
> >
> > Hi David and all,
> >
> > Il 27/01/2016 06:19, Zeno Tajoli ha scritto:
> > >> Did you load an old Koha configuration and database? Or did you
> > >> start
> > fresh?
> > >> You might need to do a Zebra re-index and a Zebra re-start.
> > >
> > > It is a start from fresh install and I do same  Zebra re-index and a
> Zebra re-
> > start.
> > > But now I try starting from a fresh debian 8 and I will say the
result.
> >
> > I finish my test about 'elements zebra::snippet'.
> > I have done 4 different installation on debian 8 (jessie) In every case:
> > Install type: koha-common
> > OS: Debian 8 (jessie)
> > Lang: en
> > Koha versione: 3.20.7.1 (oldstable)
> >
> > 1)Zebra: 2.0.61. Repos: Indexdata and Koha. MARC type: MARC21
> > -- 'elements zebra::snippet' doesn't work
> >
> > 2)Zebra: 2.0.61. Repos: Indexdata and Koha. MARC type: UNIMARC
> > -- 'elements zebra::snippet' doesn't work
> >
> > 3)Zebra: 2.0.59. Repos: Koha only. MARC type: MARC21
> > -- 'elements zebra::snippet' WORKS
> >
> > 4)Zebra: 2.0.59. Repos: Koha only. MARC type: UNIMARC
> > -- 'elements zebra::snippet' WORKS
> >
> > So the problem is not connect with MARC21/UNIMARC.
> >
> > David says that on OpenSuse Zebra 2.0.60 is ok about 'elements
> zebra::snippet'.
> >
> > It is not clear if it is a Debian 8 problem or an error on Zebra
> > 2.0.61
> >
> > I try to ask in Zebra mailing list.
> >
> > Bye
> > Zeno Tajoli
> >
> >
> >
> >
> >
> > --
> > Zeno Tajoli
> > / SVILUPPO PRODOTTI/ - Automazione Biblioteche
> > Email: z.tajoli at cineca.it Fax: 051/6132198
> > *CINECA* Consorzio Interuniversitario - Sede operativa di Segrate (MI)
> 
> 
> _______________________________________________
> Koha-devel mailing list
> Koha-devel at lists.koha-community.org
> http://lists.koha-community.org/cgi-bin/mailman/listinfo/koha-devel
> website : http://www.koha-community.org/ git :
http://git.koha-community.org/
> bugs : http://bugs.koha-community.org/