[Bug 20826] New: Error during initial setup
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Bug ID: 20826 Summary: Error during initial setup Change sponsored?: --- Product: Koha Version: master Hardware: PC OS: Linux Status: NEW Severity: blocker Priority: P5 - low Component: Installation and upgrade (command-line installer) Assignee: koha-bugs@lists.koha-community.org Reporter: mrushizha@outlook.com QA Contact: testopia@bugs.koha-community.org I am new to both Linux and Koha. I have been trying to install Koha on a new installation of Ubuntu Linux 16.04.4 LTS Desktop 32-bit. I ran the following preparation commands without any problem: sudo apt-get update sudo apt-get upgrade sudo echo deb http://debian.koha-community.org/koha stable main | sudo tee /etc/apt/sources.list.d/koha.list sudo wget -O- http://debian.koha-community.org/koha/gpg.asc | sudo apt-key add - sudo apt-get update sudo apt-get upgrade sudo apt-get clean I ran the install command and I never got passed it: sudo apt-get install koha-common All I am getting is the following: diasha@DIASHA-UBUNTU:~$ sudo apt-get install koha-common [sudo] password for diasha: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha-common : Depends: libnet-oauth2-authorizationserver-perl but it is not going to be installed E: Unable to correct problems, you have held broken packages. I have Googled this and and I also did a clean re-installation of Ubuntu and tried to install Koha to no avail. I am looking forward to your response. Regards, Michael -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Katrin Fischer <katrin.fischer@bsz-bw.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |katrin.fischer@bsz-bw.de, | |mirko@abunchofthings.net --- Comment #1 from Katrin Fischer <katrin.fischer@bsz-bw.de> --- Hi Michael, bugzilla is used to report bugs and enhancement requests, I think your question might be more related to setup/installation. Can you please ask on the mailing list instead? A lot more people will read it there and will hopefully be able to help you. -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #2 from Mirko Tietgen <mirko@abunchofthings.net> --- The file is in the Koha community repository and should be pulled automatically during installation. Could you please give the output of apt-cache policy libnet-oauth2-authorizationserver-perl -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Jonathan Druart <jonathan.druart@bugs.koha-community.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|blocker |major CC| |jonathan.druart@bugs.koha-c | |ommunity.org --- Comment #3 from Jonathan Druart <jonathan.druart@bugs.koha-community.org> --- Lowering severity as it's not confirmed. -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 sowen@edzone.net changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sowen@edzone.net --- Comment #4 from sowen@edzone.net --- as per Jonathan Druart <jonathan.druart@bugs.koha-community.org> Please comment with your info on https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 root@Pine:~# sudo apt-get install koha-common Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha-common : Depends: libnet-oauth2-authorizationserver-perl but it is not going to be installed E: Unable to correct problems, you have held broken packages. root@Pine:~# current server: Server information Koha version: 17.05.05.000 OS version ('uname -a'): Linux Pine 3.16.0-4-686-pae #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19) i686 Perl interpreter: /usr/bin/perl Perl version: 5.020002 Perl @INC: /usr/share/koha/lib /etc/perl /usr/local/lib/i386-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/i386-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/i386-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl . MySQL version: mysql Ver 14.14 Distrib 5.5.60, for debian-linux-gnu (i686) using readline 6.3 Apache version: Server version: Apache/2.4.10 (Debian) Memcached: Servers: undefined | Namespace: koha | Status: unknown | Config read from: Nowhere Note that the right place to define the memcached config is in your $KOHA_CONF file. Currently you do not have a valid memcached configuration defined. | Effective caching method: Cache::Memory Zebra version: Zebra 2.0.59 (C) 1994-2014, Index Data Zebra is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. SHA1 ID: c00bfddbf0f3608340d61298acc61dafb167f9b2 Using ICU -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #5 from Mirko Tietgen <mirko@abunchofthings.net> --- 1. What version of Debian are you running? 2. Could you please give the output of apt-cache policy libnet-oauth2-authorizationserver-perl -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #6 from sowen@edzone.net --- Distributor ID: Debian Description: Debian GNU/Linux 8.10 (jessie) Release: 8.10 Codename: jessie output: root@Pine:~# apt-cache policy libnet-oauth2-authorizationserver-perl N: Unable to locate package libnet-oauth2-authorizationserver-perl root@Pine:~# -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #7 from Mirko Tietgen <mirko@abunchofthings.net> --- What does your /etc/apt/sources.list* look like? -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #8 from sowen@edzone.net --- /etc/apt/sources.list # # deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official i386 NETINST Binary-1 20150606-12:58]/ jessie main #deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official i386 NETINST Binary-1 20150606-12:58]/ jessie main deb http://ftp.us.debian.org/debian/ jessie main deb-src http://ftp.us.debian.org/debian/ jessie main deb http://security.debian.org/ jessie/updates main deb-src http://security.debian.org/ jessie/updates main # jessie-updates, previously known as 'volatile' deb http://ftp.us.debian.org/debian/ jessie-updates main deb-src http://ftp.us.debian.org/debian/ jessie-updates main -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #9 from Jonathan Druart <jonathan.druart@bugs.koha-community.org> --- (In reply to sowen from comment #8)
/etc/apt/sources.list
Mirko was asking for /etc/apt/sources.list.d/*koha*.list -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Narcis Garcia <informatica@actiu.net> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |informatica@actiu.net --- Comment #10 from Narcis Garcia <informatica@actiu.net> --- [[Current: Koha 17.11.06-1 on Debian 9]] $ cat /etc/apt/sources.list.d/koha.list deb http://debian.koha-community.org/koha stable main $ apt update $ apt-cache show koha-common | grep -ie version Version: 18.05.01-2 Version: 17.11.06-1 $ apt full-upgrade The following packages were automatically installed and are no longer required: [[400 packages listed]] Use 'sudo apt autoremove' to remove them. The following packages will be REMOVED: koha-common libhttp-oai-perl The following NEW packages will be installed: libnet-libidn-perl libsub-quote-perl The following packages will be upgraded: apache2 [[...]] 44 upgraded, 2 newly installed, 2 to remove and 0 not upgraded. Need to get 43.1 MB of archives. After this operation, 461 MB disk space will be freed. Do you want to continue? [Y/n] n $ apt install koha-common Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha-common : Depends: libnet-oauth2-authorizationserver-perl but it is not going to be installed E: Unable to correct problems, you have held broken packages. -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #11 from Narcis Garcia <informatica@actiu.net> --- [[Current: Koha 17.11.06-1 on Debian 9]] $ apt-cache policy libnet-oauth2-authorizationserver-perl libnet-oauth2-authorizationserver-perl: Installed: (none) Candidate: 0.17-1~koha+1 Version table: 0.17-1~koha+1 500 500 http://debian.koha-community.org/koha stable/main i386 Packages -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #12 from Mirko Tietgen <mirko@abunchofthings.net> --- Please refer to this answer I gave you two months ago on the Koha mailing list and report the outcome here. https://lists.katipo.co.nz/public/koha/2018-May/050652.html -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Mirko Tietgen <mirko@abunchofthings.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Installation and upgrade |Packaging |(command-line installer) | Summary|Error during initial setup |libnet-oauth2-authorization | |server-perl not installable | |on 32bit systems --- Comment #13 from Mirko Tietgen <mirko@abunchofthings.net> --- libnet-oauth2-authorizationserver-perl depends on libcryptx-perl. Unlike koha-common and most dependencies, libcryptx-perl packages are arch-specific. We had libcryptx-perl_0.059-1~koha2_amd64.deb in the repository, but no version for i386. I have uploaded libcryptx-perl_0.059-1~koha2_i386.deb and a few other modules with the same problem. I assume everyone reporting this problem is using 32bit systems. And apparently all devs use 64bit, so nobody was able to reproduce it. -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Mirko Tietgen <mirko@abunchofthings.net> changed: What |Removed |Added ---------------------------------------------------------------------------- See Also| |https://bugs.koha-community | |.org/bugzilla3/show_bug.cgi | |?id=20800 -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Mirko Tietgen <mirko@abunchofthings.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED Status|NEW |RESOLVED -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 giacomo@cregut.it changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|FIXED |--- CC| |giacomo@cregut.it Status|RESOLVED |REOPENED --- Comment #14 from giacomo@cregut.it --- Hello, I am fairly new to Koha and I'm currently trying to install Koha on a 32-bit Debian Stretch machine. I have run into the same problem as described above, even though here it says it was fixed. I'm trying to install the current stable version of Koha(18.11) and my sources.list file contains this: deb http://debian.koha-community.org/koha dists/stable/main/binary-i386/ Whenever I try to run $ sudo apt-get install koha-common this is the output: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha-common : Depends: libnet-oauth2-authorizationserver-perl but it is not going to be installed E: Unable to correct problems, you have held broken packages. Am I missing something? Regards, Giacomo -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 David Cook <dcook@prosentient.com.au> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dcook@prosentient.com.au --- Comment #15 from David Cook <dcook@prosentient.com.au> --- I am curious why anyone would be running 32-bit Linux in this day and age. Giacomo, can you explain why you're using 32-bit Linux and not 64-bit Linux? The only modern use case I can think of is using a Raspberry Pi with a 32-bit Raspbian OS. Maybe using really old hardware? But it would have to be very old at this point not to support a 64-bit OS... -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #16 from giacomo@cregut.it --- Yes, I was trying to install Koha on a raspberry pi 3. I found a workaround as in I installed an unofficial 64bit Os and it worked. Still I don't understand why you would list it as compatible when it's not... Giacomo -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #17 from David Cook <dcook@prosentient.com.au> --- (In reply to giacomo from comment #16)
Yes, I was trying to install Koha on a raspberry pi 3. I found a workaround as in I installed an unofficial 64bit Os and it worked.
Thanks for confirming that.
Still I don't understand why you would list it as compatible when it's not...
Fair question. Mirko might be able to shed some light on it. -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #18 from Mirko Tietgen <mirko@abunchofthings.net> --- (In reply to giacomo from comment #14)
Hello, I am fairly new to Koha and I'm currently trying to install Koha on a 32-bit Debian Stretch machine. I have run into the same problem as described above, even though here it says it was fixed. I'm trying to install the current stable version of Koha(18.11) and my sources.list file contains this: deb http://debian.koha-community.org/koha dists/stable/main/binary-i386/
The line should be deb http://debian.koha-community.org/koha 18.11 main Does this work? Or do you need armhf? Then it is not a problem of 32bit vs 64bit, but amd64 and i386 being supported but armhf being not. -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #19 from Mirko Tietgen <mirko@abunchofthings.net> --- (In reply to David Cook from comment #15)
The only modern use case I can think of is using a Raspberry Pi with a 32-bit Raspbian OS.
Good catch, saves me a lot of headache :) -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Geodirk <geodirk@gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |geodirk@gmail.com --- Comment #20 from Geodirk <geodirk@gmail.com> --- Is there a final solution for this as I hit the same libnet-oauth2-authorizationserver-perl issue? I went and changed the /etc/apt/sources.list.d/koha.list to become: deb http://debian.koha-community.org/koha 18.11 main After an apt-get update, I get this: root@connectbox:~# apt-get update Hit:1 http://archive.raspberrypi.org/debian stretch InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease Hit:3 http://debian.koha-community.org/koha 18.11 InRelease Reading package lists... Done N: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'http://debian.koha-community.org/koha 18.11 InRelease' doesn't support architecture 'armhf' What am I missing? Also trying to install on a RPi 3B+ (32 bit). -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Mason James <mtj@kohaaloha.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |mtj@kohaaloha.com --- Comment #21 from Mason James <mtj@kohaaloha.com> --- (In reply to Geodirk from comment #20)
Is there a final solution for this as I hit the same libnet-oauth2-authorizationserver-perl issue? I went and changed the /etc/apt/sources.list.d/koha.list to become: deb http://debian.koha-community.org/koha 18.11 main
After an apt-get update, I get this:
root@connectbox:~# apt-get update Hit:1 http://archive.raspberrypi.org/debian stretch InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease Hit:3 http://debian.koha-community.org/koha 18.11 InRelease Reading package lists... Done N: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'http://debian.koha-community.org/koha 18.11 InRelease' doesn't support architecture 'armhf'
What am I missing? Also trying to install on a RPi 3B+ (32 bit).
try prefixing your koha repo line with 'deb [arch=i386] ', like... deb [arch=i386] http://debian.koha-community.org/koha stable main then run 'sudo apt-get update' again fyi, some good info here... http://avengingchicken.online/misc/installing_koha_on_raspberry-pi-4.pdf -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Mason James <mtj@kohaaloha.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|libnet-oauth2-authorization |libnet-oauth2-authorization |server-perl not installable |server-perl not installable |on 32bit systems |on armhf/rpi systems --- Comment #22 from Mason James <mtj@kohaaloha.com> ---
fyi, some good info here... http://avengingchicken.online/misc/installing_koha_on_raspberry-pi-4.pdf
here too.. https://wiki.koha-community.org/wiki/Koha_on_a_Raspberry_Pi_3_B%2B ------------ Add the Koha package source information 1. Add the source information for the Koha package: echo deb [arch=i386] http://debian.koha-community.org/koha stable main | sudo tee /etc/apt/sources.list.d/koha.list ------------ -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Dwight Tuinstra <dwight.tuinstra@gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dwight.tuinstra@gmail.com --- Comment #23 from Dwight Tuinstra <dwight.tuinstra@gmail.com> --- I am also hitting this bug, on a fresh installation of 19.11 on a fully upgraded version of 64-bit Debian, while following the documentation at - https://wiki.koha-community.org/wiki/Preparing_your_system and - https://wiki.koha-community.org/wiki/Koha_on_Debian Not sure if this is an installer bug or a documentation bug. $ sudo apt-get install koha-common [sudo] password for dwight: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha-common : Depends: libnet-oauth2-authorizationserver-perl but it is not going to be installed E: Unable to correct problems, you have held broken packages. Other information: $ apt-cache show koha-common Package: koha-common Source: koha Version: 19.11.02-1 $ cat /etc/apt/sources.list.d/koha.list deb http://debian.koha-community.org/koha 19.11 main $ sudo apt-get install build-essential ssh locate sudo make ntp Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version (12.3). locate is already the newest version (4.6.0+git+20161106-2). make is already the newest version (4.1-9.1). ntp is already the newest version (1:4.2.8p10+dfsg-3+deb9u2). ssh is already the newest version (1:7.4p1-10+deb9u7). sudo is already the newest version (1.8.19p1-2.1+deb9u2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. $ uname -a Linux opac 4.9.0-12-686-pae #1 SMP Debian 4.9.210-1 (2020-01-20) i686 GNU/Linux -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #24 from Dwight Tuinstra <dwight.tuinstra@gmail.com> --- Here are the messages when trying to install the problem packages directly: $ sudo apt-get install libnet-oauth2-authorizationserver-perl Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libnet-oauth2-authorizationserver-perl : Depends: libcryptx-perl (>= 0.021) but it is not installable E: Unable to correct problems, you have held broken packages. $ sudo apt-get install libcryptx-perl Reading package lists... Done Building dependency tree Reading state information... Done Package libcryptx-perl is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'libcryptx-perl' has no installation candidate -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #25 from Jonathan Druart <jonathan.druart@bugs.koha-community.org> --- (In reply to Dwight Tuinstra from comment #23)
I am also hitting this bug, on a fresh installation of 19.11 on a fully upgraded version of 64-bit Debian, while following the documentation at
[...]
$ uname -a Linux opac 4.9.0-12-686-pae #1 SMP Debian 4.9.210-1 (2020-01-20) i686 GNU/Linux
64-bit vs i686? :) -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #26 from Narcis Garcia <informatica@actiu.net> --- Jonathan, a fully upgraded Debian (stable) comes with Linux 4.19 kernel. Linux 4.9 is from oldstable Debian. - Debian 10 (buster) is current one - Debian 9 (stretch) is old one (it seems to be OS you are running) But, at this time, I've read newest Debian version supported by Koha packages is 9 (stretch, oldstable). This means you are at right environment. What repository lines do you have for Koha under /etc/apt/sources.list* ? -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #27 from Dwight Tuinstra <dwight.tuinstra@gmail.com> --- $ cat /etc/apt/sources.list.d/koha.list deb http://debian.koha-community.org/koha 19.11 main -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Mason James <mtj@kohaaloha.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|libnet-oauth2-authorization |libnet-oauth2-authorization |server-perl not installable |server-perl not installable |on armhf/rpi systems |on 32bit systems -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 --- Comment #28 from Dwight Tuinstra <dwight.tuinstra@gmail.com> --- I have found what may be a workaround, based on this comment from bug 23128 (https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=23128): "So far we have libcryptx-perl in the Koha repository, but it only works for Jessie, not Xenial, and it breaks Stretch without backports and Bionic. "I propose to remove libcryptx-perl from our repository. The result will be -Debian 10 and Ubuntu 18.04 work out of the box -Debian 9 needs backports enabled This appears to work (at least, apt-get install koha-common is running now): 1) Create /etc/apt/sources.list.d/stretch-backports.list with this line: deb http://deb.debian.org/debian stretch-backports main 2) Run apt-get update Since the workaround is known but not mentioned in the documentation, this appears to be a documentation bug. I will file a report there. -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Jonathan Druart <jonathan.druart@bugs.koha-community.org> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |me@mphomosia.com --- Comment #29 from Jonathan Druart <jonathan.druart@bugs.koha-community.org> --- *** Bug 25981 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Katrin Fischer <katrin.fischer@bsz-bw.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |NEW --- Comment #30 from Katrin Fischer <katrin.fischer@bsz-bw.de> --- Can someone tell if we still need to do something here? Is it worth adding documentation to the wiki or are the versions too old now? -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20826 Martin Renvoize <martin.renvoize@ptfs-europe.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |WONTFIX Status|NEW |RESOLVED CC| |martin.renvoize@ptfs-europe | |.com -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
participants (1)
-
bugzilla-daemon＠bugs.koha-community.org