[Bug 39045] New: Add translation context for "Active" and "Inactive"
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Bug ID: 39045 Summary: Add translation context for "Active" and "Inactive" Change sponsored?: --- Product: Koha Version: unspecified Hardware: All OS: All Status: NEW Severity: enhancement Priority: P5 - low Component: I18N/L10N Assignee: koha-bugs@lists.koha-community.org Reporter: caroline.cyr-la-rose@inlibro.com QA Contact: testopia@bugs.koha-community.org CC: f.demians@tamil.fr, jonathan.druart@gmail.com In French, the translations for "Active" and "Inactive" depend on the gender of the thing that is active/inactive. For example, a currency is feminine so it will be active/inactive, but a supplier is masculine so it will be actif/inactif. I propose to add translation context for "Active" and "Inactive". -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #1 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177559 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177559&action=edit Bug 39045: Add translation context to vendor status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used for the vendor status in acquisitions. To test: 1. Go to Acquisitions 2. Click 'New vendor' --> At the bottom of the form, in the 'Ordering information' section, there should be a choice Vendor is: Active Inactive 3. Enter a vendor name 4. Click 'Save' 5. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Active 6. Click 'Edit vendor' 7. Choose 'Inactive' 8. Click 'Save' --> Next to the vendor name, it should say '(inactive)' 9. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Inactive 10. Apply patch 11. Update translations ktd --shell gulp po:update --lang fr-CA 12. View the fr-CA-messages.po file --> There should be entries with 'Vendor status' in msgctxt 13. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 14. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 15. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 16. Repeat steps 1-9 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes. You are the assignee for the bug.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #2 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177560 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177560&action=edit Bug 39045: Add translation context to currency active status This patch adds translation context to the 'Active' status for currencies. To test: 1. Go to Administration > Currencies and exchange rates --> There should be a column with the heading 'Active' 2. Click 'Edit' next to one of the currencies --> There should be a field Active: 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be entries with 'Currency status' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #3 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177561 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177561&action=edit Bug 39045: Add translation context to budget active status This patch adds translation context to budget active status. 1. Go to Acquisitions --> In the table under 'All available funds', there should be a column with the heading 'Active' 2. Apply patch 3. Update translations ktd --shell gulp po:update --lang fr-CA 4. View the fr-CA-messages.po file --> There should be an entry with 'Budget status' in msgctxt 5. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 6. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 7. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 8. Repeat step 1 --> Translation should be whatever you put in the po file -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #4 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177562 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177562&action=edit Bug 39045: Add translation context to stock rotation active status This patch adds translation context to the 'Active' status of stock rotation. To test: 1. Enable the StockRotation system preference 1.1. Go to Administration > System preferences 1.2. Search for StockRotation 1.3. Choose 'Enable' 1.4. Click 'Save all Circulation preferences' 2. Go to Cataloging > Stock rotation 3. Click 'New rota' 4. Enter a name for the rota 5. Click 'Save' --> There should be a column with the heading 'Active' 6. Click 'Manage' > 'Stages' 7. Click 'Add a stage' 8. Enter a duration 9. Click 'Save' 10. Click 'Return to rotas' 11. Click 'Activate' 12. Click 'Manage' > 'Items' 13. Click 'Add items' 14. Enter a barcode (e.g. 39999000001518) 15. Click 'Save' 16. Click the title of the item 17. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Active' 18. Apply patch 19. Update translations ktd --shell gulp po:update --lang fr-CA 20. View the fr-CA-messages.po file --> There should be an entry with 'Rota status' in msgctxt 21. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 22. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 23. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 24. Repeat step 1-17 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|koha-bugs@lists.koha-commun |caroline.cyr-la-rose@inlibr |ity.org |o.com -- You are receiving this mail because: You are the assignee for the bug. You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #177559|0 |1 is obsolete| | --- Comment #5 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177590 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177590&action=edit Bug 39045: Add translation context to vendor status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used for the vendor status in acquisitions. To test: 1. Go to Acquisitions 2. Click 'New vendor' --> At the bottom of the form, in the 'Ordering information' section, there should be a choice Vendor is: Active Inactive 3. Enter a vendor name 4. Click 'Save' 5. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Active 6. Click 'Edit vendor' 7. Choose 'Inactive' 8. Click 'Save' --> Next to the vendor name, it should say '(inactive)' 9. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Inactive 10. Apply patch 11. Update translations ktd --shell gulp po:update --lang fr-CA 12. View the fr-CA-messages.po file --> There should be entries with 'Vendor status' in msgctxt 13. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 14. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 15. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 16. Repeat steps 1-9 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #6 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177591 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177591&action=edit Bug 39045: Add translation context to course status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the course status in course reserves. To test: 1. Go to Course reserves 2. Click 'New course' 3. Fill out the mandatory fields 4. Click 'Save' --> In the course details, there should be a field Status 'Active' 5. Click 'Edit course' 6. Uncheck 'Enabled?' 7. Click 'Save' --> In the course details, there should be a field Status 'Inactive' 8. Apply patch 9. Update translations ktd --shell gulp po:update --lang fr-CA 10. View the fr-CA-messages.po file --> There should be entries with 'Course status' in msgctxt 11. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 12. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 13. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 14. Repeat step 1-7 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #177562|0 |1 is obsolete| | --- Comment #7 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177593 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177593&action=edit Bug 39045: Add translation context to stock rotation status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the status of stock rotation rota. To test: 1. Enable the StockRotation system preference 1.1. Go to Administration > System preferences 1.2. Search for StockRotation 1.3. Choose 'Enable' 1.4. Click 'Save all Circulation preferences' 2. Go to Cataloging > Stock rotation 3. Click 'New rota' 4. Enter a name for the rota 5. Click 'Save' --> There should be a column with the heading 'Active' 6. Click 'Manage' > 'Stages' 7. Click 'Add a stage' 8. Enter a duration 9. Click 'Save' 10. Click 'Return to rotas' 11. Click 'Activate' 12. Click 'Manage' > 'Items' 13. Click 'Add items' 14. Enter a barcode (e.g. 39999000001518) 15. Click 'Save' 16. Click the title of the item 17. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Active' 18. Go back to Cataloging > Stock rotation 19. Click 'Deactivate' 20. Click 'Manage' > 'Items' 21. Click the title of the item 22. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Inactive' 23. Apply patch 24. Update translations ktd --shell gulp po:update --lang fr-CA 25. View the fr-CA-messages.po file --> There should be entries with 'Rota status' in msgctxt 26. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 27. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 28. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 29. Repeat step 1-17 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #8 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177595 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177595&action=edit Bug 39045: Add translation context to 'Inactive' as report group This patch adds translation context to the 'Inactive' heading in reports, to differentiate it from an inactive status of something. To test: 1. Go to Reports --> There should be an 'Inactive' section heading on the right 2. Click on one of the inactive reports --> There should be an 'Inactive' section heading in the left menu 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be an entry with 'Group of reports to get inactive patrons and items' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #9 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177596 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177596&action=edit Bug 39045: Add translation context to API key active status This patch adds translation context to 'Active' and 'Inactive' when used as the status of an API key. To test: 1. Enable the RESTOAuth2ClientCredentials system preference 1.1. Go to Administration > System preferences 1.2. Search for RESTOAuth2ClientCredentials 1.3. Choose 'Enable' 1.4. Click 'Save all Web services preferences' 2. Click your user name at the top right corner and choose 'My account' 3. Click 'More' > 'Manage API keys' 4. Click 'Generate a new client id/secret pair' 5. Enter a description 6. Click 'Save' --> There should be a column with the heading 'Active' 7. Apply patch 8. Update translations ktd --shell gulp po:update --lang fr-CA 9. View the fr-CA-messages.po file --> There should be an entry with 'API client id/key pair status' in msgctxt 10. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 11. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 12. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 13. Repeat step 1-6 --> Translation should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Depends on| |39061 Referenced Bugs: https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39061 [Bug 39061] Allow translation context in vue files -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #10 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177601 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177601&action=edit Bug 39045: Add translation context to ERM data providers status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the status of ERM data providers. This patch needs the patch in bug 39061 in order to work properly. To test: 1. Enable the ERMModule system preference 1.1. Go to Administration > System preferences 1.2. Search for ERMMdoule 1.3. Choose 'Enable' 1.4. Click 'Save all E-resource management preferences' 2. Go to E-resource management 3. Click 'Data providers' 4. Click 'New data provider' --> There should be a Harvester status field with Active and Inactive options 5. Click 'Create manually' 6. Fill out the mandatory fields 7. Click 'Submit' --> There should be a Status field with value 'Active' 8. Click 'Data providers" --> The status in the column should be 'Active' 9. Click 'Edit' 10. Change Harvester status to Inactive 11. Click 'Submit' --> There should be a Status field with value 'Inactive' 12. Click 'Data providers" --> The status in the column should be 'Inactive' 13. Apply patch 14. Update translations ktd --shell gulp po:update --lang fr-CA 15. View the fr-CA-messages.po file --> There should be entries with 'ERM data provider status' in msgctxt 16. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 17. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 18. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 19. Repeat step 1-12 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #11 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- I only have the booking statuses left, but I can't find out how to make them appear. I can manage 'Pending' and 'Cancelled', but I can never get 'Active'. -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |Needs Signoff --- Comment #12 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- All the test plans in one comment A. Currencies 1. Go to Administration > Currencies and exchange rates --> There should be a column with the heading 'Active' 2. Click 'Edit' next to one of the currencies --> There should be a field Active: 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be entries with 'Currency status' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file B. Budgets 1. Go to Acquisitions --> In the table under 'All available funds', there should be a column with the heading 'Active' 2. Apply patch 3. Update translations ktd --shell gulp po:update --lang fr-CA 4. View the fr-CA-messages.po file --> There should be an entry with 'Budget status' in msgctxt 5. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 6. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 7. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 8. Repeat step 1 --> Translation should be whatever you put in the po file C. Vendors 1. Go to Acquisitions 2. Click 'New vendor' --> At the bottom of the form, in the 'Ordering information' section, there should be a choice Vendor is: Active Inactive 3. Enter a vendor name 4. Click 'Save' 5. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Active 6. Click 'Edit vendor' 7. Choose 'Inactive' 8. Click 'Save' --> Next to the vendor name, it should say '(inactive)' 9. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Inactive 10. Apply patch 11. Update translations ktd --shell gulp po:update --lang fr-CA 12. View the fr-CA-messages.po file --> There should be entries with 'Vendor status' in msgctxt 13. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 14. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 15. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 16. Repeat steps 1-9 --> Translations should be whatever you put in the po file D. Courses 1. Go to Course reserves 2. Click 'New course' 3. Fill out the mandatory fields 4. Click 'Save' --> In the course details, there should be a field Status 'Active' 5. Click 'Edit course' 6. Uncheck 'Enabled?' 7. Click 'Save' --> In the course details, there should be a field Status 'Inactive' 8. Apply patch 9. Update translations ktd --shell gulp po:update --lang fr-CA 10. View the fr-CA-messages.po file --> There should be entries with 'Course status' in msgctxt 11. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 12. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 13. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 14. Repeat step 1-7 --> Translations should be whatever you put in the po file E. Stock rotation rotas 1. Enable the StockRotation system preference 1.1. Go to Administration > System preferences 1.2. Search for StockRotation 1.3. Choose 'Enable' 1.4. Click 'Save all Circulation preferences' 2. Go to Cataloging > Stock rotation 3. Click 'New rota' 4. Enter a name for the rota 5. Click 'Save' --> There should be a column with the heading 'Active' 6. Click 'Manage' > 'Stages' 7. Click 'Add a stage' 8. Enter a duration 9. Click 'Save' 10. Click 'Return to rotas' 11. Click 'Activate' 12. Click 'Manage' > 'Items' 13. Click 'Add items' 14. Enter a barcode (e.g. 39999000001518) 15. Click 'Save' 16. Click the title of the item 17. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Active' 18. Go back to Cataloging > Stock rotation 19. Click 'Deactivate' 20. Click 'Manage' > 'Items' 21. Click the title of the item 22. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Inactive' 23. Apply patch 24. Update translations ktd --shell gulp po:update --lang fr-CA 25. View the fr-CA-messages.po file --> There should be entries with 'Rota status' in msgctxt 26. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 27. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 28. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 29. Repeat step 1-17 --> Translations should be whatever you put in the po file F. Report grouping 1. Go to Reports --> There should be an 'Inactive' section heading on the right 2. Click on one of the inactive reports --> There should be an 'Inactive' section heading in the left menu 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be an entry with 'Group of reports to get inactive patrons and items' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file G. API keys 1. Enable the RESTOAuth2ClientCredentials system preference 1.1. Go to Administration > System preferences 1.2. Search for RESTOAuth2ClientCredentials 1.3. Choose 'Enable' 1.4. Click 'Save all Web services preferences' 2. Click your user name at the top right corner and choose 'My account' 3. Click 'More' > 'Manage API keys' 4. Click 'Generate a new client id/secret pair' 5. Enter a description 6. Click 'Save' --> There should be a column with the heading 'Active' 7. Apply patch 8. Update translations ktd --shell gulp po:update --lang fr-CA 9. View the fr-CA-messages.po file --> There should be an entry with 'API client id/key pair status' in msgctxt 10. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 11. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 12. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 13. Repeat step 1-6 --> Translation should be whatever you put in the po file H. ERM data providers 1. Enable the ERMModule system preference 1.1. Go to Administration > System preferences 1.2. Search for ERMMdoule 1.3. Choose 'Enable' 1.4. Click 'Save all E-resource management preferences' 2. Go to E-resource management 3. Click 'Data providers' 4. Click 'New data provider' --> There should be a Harvester status field with Active and Inactive options 5. Click 'Create manually' 6. Fill out the mandatory fields 7. Click 'Submit' --> There should be a Status field with value 'Active' 8. Click 'Data providers" --> The status in the column should be 'Active' 9. Click 'Edit' 10. Change Harvester status to Inactive 11. Click 'Submit' --> There should be a Status field with value 'Inactive' 12. Click 'Data providers" --> The status in the column should be 'Inactive' 13. Apply patch 14. Update translations ktd --shell gulp po:update --lang fr-CA 15. View the fr-CA-messages.po file --> There should be entries with 'ERM data provider status' in msgctxt 16. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 17. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 18. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 19. Repeat step 1-12 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #13 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- I made a mistake in the ERM data providers test plan, the translations will be in the fr-CA-messages-js.po file, not fr-CA-messages.po. -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #14 from Jonathan Druart <jonathan.druart@gmail.com> --- I think we should move the colons out of the strings, to avoid that the translation to appear twice. Unless you have a good argument against that? +#: koha-tmpl/intranet-tmpl/prog/en/modules/admin/currency.tt:161 +msgctxt "Currency status" +msgid "Active: " +msgstr "" +#: koha-tmpl/intranet-tmpl/prog/en/modules/admin/currency.tt:241 +#, fuzzy +msgctxt "Currency status" +msgid "Active" +msgstr "Actions" -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #15 from Jonathan Druart <jonathan.druart@gmail.com> --- What about this one? +#: koha-tmpl/intranet-tmpl/prog/en/modules/reports/orders_by_budget.tt:120 +#, c-format +msgid "(inactive)" +msgstr "(inactif)" -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #16 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- (In reply to Jonathan Druart from comment #14)
I think we should move the colons out of the strings, to avoid that the translation to appear twice. Unless you have a good argument against that?
I don't know if it qualifies as a "good" argument, but in French, typology rules state that there must be a non-breaking space between the word and the colon (e.g. "Active :"). If the colon was not in the string, I don't know how we could do that. -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #17 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- Created attachment 177711 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=177711&action=edit Bug 39045: Add translation context to fund status (inactive) This patch adds translation context to '(inactive)' when used for the fund status in acquisitions. To test: 1. Create an inactive budget and fund 1.1. Go to Administration > Budgets 1.2. Click 'New budget' 1.3. Fill out the mandatory fields and the total amount, DO NOT check the 'Make budget active' box 1.4. Click 'Save' 1.5. Click 'Inactive budgets' 1.6. Next to the new budget, click 'Actions' > 'Add fund' 1.7. Fill out the mandatory fields 1.8. Click 'Submit' 2. Create a suggestion and link it to an inactive fund 2.1. Go to Acquisitions > Suggestions 2.2. Click 'New purchase suggestion' 2.3. Fill out the title 2.4. Under 'Acquisition information', check 'Show inactive' 2.5. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 2.6. Choose the inactive fund 2.7. Click 'Submit your suggestion' 3. Create an order from new file, link it to an inactive fund 3.1. Go to Acquisitions 3.2. Click 'Search' under 'Search vendors' 3.3. Click 'Add to basket' next to 'My basket' 3.4. Click 'From a new file' 3.5. Choose a MARC file (I attached an example if necessary) 3.6. Click 'Upload file' 3.7. Click 'Stage for import' 3.8. Click 'Add staged files to basket' 3.9. Click 'Default accounting details' 3.10. Check 'Show inactive' next to the fund dropdown 3.11. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 3.12. Choose the inactive fund 3.13. Click 'Item information' 3.14. Fill out the 'y - Koha item type' field 3.15. Click 'Select to import' 3.16. Check the 'Show inactive funds' box 3.17. Check the box next to the record 3.18. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 3.19. Enter a price 3.20. Click 'Save' **Note: there are 5 occurrences of "(inactive)" in that page, but I only found those two...** 4. Create a duplicate order 4.1. Click 'Add to basket' 4.2. Click 'From existing orders (copy)' 4.3. Search for the previous order 4.4. Check the box next to the order 4.5. Click 'Next ->' 4.6. Check 'Show inactive' next to the fund dropdown 4.7. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 4.8. Choose the inactive fund 4.9. Click 'Duplicate orders' 5. Create an order from an empty record 5.1. Click 'Add to basket' 5.2. Click 'From a new (empty) record' 5.3. Fill out catalog details (at least the title) 5.4. Fill out the 'y - Koha item type' field 5.5. Check 'Show inactive' next to the fund dropdown 5.6. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 5.7. Choose the inactive fund 5.8. Enter a vendor price 5.9. Click 'Save' 6. Close the basket and receive the orders 6.1. Click 'Close basket' 6.2. Click 'Yes, close (Y)' 6.3. Click 'Receive shipments' 6.4. Enter a vendor invoice number 6.5. Check 'Show inactive' 6.6. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 6.7. Click 'Next' 6.8. Click 'Receive' next to an order 6.9. Check 'Show inactive' 6.10. Open the 'Fund' dropdown --> There should be your budget with (Inactive) next to it --> There should be your new fund with (inactive) next to it 6.11. Choose the inactive fund 6.12. Check 'Receive?' 6.13. Click 'Confirm' 6.14. Click 'Finish receiving' 6.15. Click 'Show inactive' next to 'Shipping fund' --> There should be your new fund with (inactive) next to it 7. View Orders by fund report 7.1. Go to Reports > Orders by fund 7.2. Check 'Show inactive' 7.3. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 8. Apply patch 9. Update translations ktd --shell gulp po:update --lang fr-CA 10. View the fr-CA-messages.po file --> There should be entries with 'Fund status' and one entry with 'Budget status' in msgctxt 11. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 12. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 13. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 14. Repeat steps 1-7 --> Translations should be whatever you put in the po file -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #18 from Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> --- (In reply to Jonathan Druart from comment #15)
What about this one?
+#: koha-tmpl/intranet-tmpl/prog/en/modules/reports/orders_by_budget.tt:120 +#, c-format +msgid "(inactive)" +msgstr "(inactif)"
I added a new patch with the (inactive) when used for the fund status -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Owen Leonard <oleonard@myacpl.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Patch complexity|--- |Small patch Status|Needs Signoff |Signed Off -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Owen Leonard <oleonard@myacpl.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #177560|0 |1 is obsolete| | Attachment #177561|0 |1 is obsolete| | Attachment #177590|0 |1 is obsolete| | Attachment #177591|0 |1 is obsolete| | Attachment #177593|0 |1 is obsolete| | Attachment #177595|0 |1 is obsolete| | Attachment #177596|0 |1 is obsolete| | Attachment #177601|0 |1 is obsolete| | Attachment #177711|0 |1 is obsolete| | --- Comment #19 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178900 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178900&action=edit Bug 39045: Add translation context to currency active status This patch adds translation context to the 'Active' status for currencies. To test: 1. Go to Administration > Currencies and exchange rates --> There should be a column with the heading 'Active' 2. Click 'Edit' next to one of the currencies --> There should be a field Active: 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be entries with 'Currency status' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #20 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178901 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178901&action=edit Bug 39045: Add translation context to budget active status This patch adds translation context to budget active status. 1. Go to Acquisitions --> In the table under 'All available funds', there should be a column with the heading 'Active' 2. Apply patch 3. Update translations ktd --shell gulp po:update --lang fr-CA 4. View the fr-CA-messages.po file --> There should be an entry with 'Budget status' in msgctxt 5. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 6. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 7. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 8. Repeat step 1 --> Translation should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #21 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178902 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178902&action=edit Bug 39045: Add translation context to vendor status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used for the vendor status in acquisitions. To test: 1. Go to Acquisitions 2. Click 'New vendor' --> At the bottom of the form, in the 'Ordering information' section, there should be a choice Vendor is: Active Inactive 3. Enter a vendor name 4. Click 'Save' 5. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Active 6. Click 'Edit vendor' 7. Choose 'Inactive' 8. Click 'Save' --> Next to the vendor name, it should say '(inactive)' 9. Click the name of the vendor --> In the 'Ordering information' box (bottom left), there should be a mention Vendor is: Inactive 10. Apply patch 11. Update translations ktd --shell gulp po:update --lang fr-CA 12. View the fr-CA-messages.po file --> There should be entries with 'Vendor status' in msgctxt 13. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 14. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 15. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 16. Repeat steps 1-9 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #22 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178903 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178903&action=edit Bug 39045: Add translation context to course status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the course status in course reserves. To test: 1. Go to Course reserves 2. Click 'New course' 3. Fill out the mandatory fields 4. Click 'Save' --> In the course details, there should be a field Status 'Active' 5. Click 'Edit course' 6. Uncheck 'Enabled?' 7. Click 'Save' --> In the course details, there should be a field Status 'Inactive' 8. Apply patch 9. Update translations ktd --shell gulp po:update --lang fr-CA 10. View the fr-CA-messages.po file --> There should be entries with 'Course status' in msgctxt 11. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 12. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 13. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 14. Repeat step 1-7 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #23 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178904 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178904&action=edit Bug 39045: Add translation context to stock rotation status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the status of stock rotation rota. To test: 1. Enable the StockRotation system preference 1.1. Go to Administration > System preferences 1.2. Search for StockRotation 1.3. Choose 'Enable' 1.4. Click 'Save all Circulation preferences' 2. Go to Cataloging > Stock rotation 3. Click 'New rota' 4. Enter a name for the rota 5. Click 'Save' --> There should be a column with the heading 'Active' 6. Click 'Manage' > 'Stages' 7. Click 'Add a stage' 8. Enter a duration 9. Click 'Save' 10. Click 'Return to rotas' 11. Click 'Activate' 12. Click 'Manage' > 'Items' 13. Click 'Add items' 14. Enter a barcode (e.g. 39999000001518) 15. Click 'Save' 16. Click the title of the item 17. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Active' 18. Go back to Cataloging > Stock rotation 19. Click 'Deactivate' 20. Click 'Manage' > 'Items' 21. Click the title of the item 22. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Inactive' 23. Apply patch 24. Update translations ktd --shell gulp po:update --lang fr-CA 25. View the fr-CA-messages.po file --> There should be entries with 'Rota status' in msgctxt 26. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 27. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 28. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 29. Repeat step 1-17 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #24 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178905 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178905&action=edit Bug 39045: Add translation context to 'Inactive' as report group This patch adds translation context to the 'Inactive' heading in reports, to differentiate it from an inactive status of something. To test: 1. Go to Reports --> There should be an 'Inactive' section heading on the right 2. Click on one of the inactive reports --> There should be an 'Inactive' section heading in the left menu 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be an entry with 'Group of reports to get inactive patrons and items' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #25 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178906 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178906&action=edit Bug 39045: Add translation context to API key active status This patch adds translation context to 'Active' and 'Inactive' when used as the status of an API key. To test: 1. Enable the RESTOAuth2ClientCredentials system preference 1.1. Go to Administration > System preferences 1.2. Search for RESTOAuth2ClientCredentials 1.3. Choose 'Enable' 1.4. Click 'Save all Web services preferences' 2. Click your user name at the top right corner and choose 'My account' 3. Click 'More' > 'Manage API keys' 4. Click 'Generate a new client id/secret pair' 5. Enter a description 6. Click 'Save' --> There should be a column with the heading 'Active' 7. Apply patch 8. Update translations ktd --shell gulp po:update --lang fr-CA 9. View the fr-CA-messages.po file --> There should be an entry with 'API client id/key pair status' in msgctxt 10. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 11. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 12. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 13. Repeat step 1-6 --> Translation should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #26 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178907 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178907&action=edit Bug 39045: Add translation context to ERM data providers status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the status of ERM data providers. This patch needs the patch in bug 39061 in order to work properly. To test: 1. Enable the ERMModule system preference 1.1. Go to Administration > System preferences 1.2. Search for ERMMdoule 1.3. Choose 'Enable' 1.4. Click 'Save all E-resource management preferences' 2. Go to E-resource management 3. Click 'Data providers' 4. Click 'New data provider' --> There should be a Harvester status field with Active and Inactive options 5. Click 'Create manually' 6. Fill out the mandatory fields 7. Click 'Submit' --> There should be a Status field with value 'Active' 8. Click 'Data providers" --> The status in the column should be 'Active' 9. Click 'Edit' 10. Change Harvester status to Inactive 11. Click 'Submit' --> There should be a Status field with value 'Inactive' 12. Click 'Data providers" --> The status in the column should be 'Inactive' 13. Apply patch 14. Update translations ktd --shell gulp po:update --lang fr-CA 15. View the fr-CA-messages.po file --> There should be entries with 'ERM data provider status' in msgctxt 16. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 17. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 18. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 19. Repeat step 1-12 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #27 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178908 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178908&action=edit Bug 39045: Add translation context to fund status (inactive) This patch adds translation context to '(inactive)' when used for the fund status in acquisitions. To test: 1. Create an inactive budget and fund 1.1. Go to Administration > Budgets 1.2. Click 'New budget' 1.3. Fill out the mandatory fields and the total amount, DO NOT check the 'Make budget active' box 1.4. Click 'Save' 1.5. Click 'Inactive budgets' 1.6. Next to the new budget, click 'Actions' > 'Add fund' 1.7. Fill out the mandatory fields 1.8. Click 'Submit' 2. Create a suggestion and link it to an inactive fund 2.1. Go to Acquisitions > Suggestions 2.2. Click 'New purchase suggestion' 2.3. Fill out the title 2.4. Under 'Acquisition information', check 'Show inactive' 2.5. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 2.6. Choose the inactive fund 2.7. Click 'Submit your suggestion' 3. Create an order from new file, link it to an inactive fund 3.1. Go to Acquisitions 3.2. Click 'Search' under 'Search vendors' 3.3. Click 'Add to basket' next to 'My basket' 3.4. Click 'From a new file' 3.5. Choose a MARC file (I attached an example if necessary) 3.6. Click 'Upload file' 3.7. Click 'Stage for import' 3.8. Click 'Add staged files to basket' 3.9. Click 'Default accounting details' 3.10. Check 'Show inactive' next to the fund dropdown 3.11. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 3.12. Choose the inactive fund 3.13. Click 'Item information' 3.14. Fill out the 'y - Koha item type' field 3.15. Click 'Select to import' 3.16. Check the 'Show inactive funds' box 3.17. Check the box next to the record 3.18. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 3.19. Enter a price 3.20. Click 'Save' **Note: there are 5 occurrences of "(inactive)" in that page, but I only found those two...** 4. Create a duplicate order 4.1. Click 'Add to basket' 4.2. Click 'From existing orders (copy)' 4.3. Search for the previous order 4.4. Check the box next to the order 4.5. Click 'Next ->' 4.6. Check 'Show inactive' next to the fund dropdown 4.7. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 4.8. Choose the inactive fund 4.9. Click 'Duplicate orders' 5. Create an order from an empty record 5.1. Click 'Add to basket' 5.2. Click 'From a new (empty) record' 5.3. Fill out catalog details (at least the title) 5.4. Fill out the 'y - Koha item type' field 5.5. Check 'Show inactive' next to the fund dropdown 5.6. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 5.7. Choose the inactive fund 5.8. Enter a vendor price 5.9. Click 'Save' 6. Close the basket and receive the orders 6.1. Click 'Close basket' 6.2. Click 'Yes, close (Y)' 6.3. Click 'Receive shipments' 6.4. Enter a vendor invoice number 6.5. Check 'Show inactive' 6.6. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 6.7. Click 'Next' 6.8. Click 'Receive' next to an order 6.9. Check 'Show inactive' 6.10. Open the 'Fund' dropdown --> There should be your budget with (Inactive) next to it --> There should be your new fund with (inactive) next to it 6.11. Choose the inactive fund 6.12. Check 'Receive?' 6.13. Click 'Confirm' 6.14. Click 'Finish receiving' 6.15. Click 'Show inactive' next to 'Shipping fund' --> There should be your new fund with (inactive) next to it 7. View Orders by fund report 7.1. Go to Reports > Orders by fund 7.2. Check 'Show inactive' 7.3. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 8. Apply patch 9. Update translations ktd --shell gulp po:update --lang fr-CA 10. View the fr-CA-messages.po file --> There should be entries with 'Fund status' and one entry with 'Budget status' in msgctxt 11. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 12. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 13. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 14. Repeat steps 1-7 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #28 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 178909 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=178909&action=edit Bug 39045: (follow-up) Fix spacing Adding some whitespace to the markup so that the "(inactive)" has a space before it. -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Lisette Scheer <lisette@bywatersolutions.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|Signed Off |Patch doesn't apply CC| |lisette@bywatersolutions.co | |m --- Comment #29 from Lisette Scheer <lisette@bywatersolutions.com> --- Moving the vendors into vue means this won't apply anymore as one of the patches is trying to update a file that no longer exists. -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Owen Leonard <oleonard@myacpl.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #178900|0 |1 is obsolete| | Attachment #178901|0 |1 is obsolete| | Attachment #178902|0 |1 is obsolete| | Attachment #178903|0 |1 is obsolete| | Attachment #178904|0 |1 is obsolete| | Attachment #178905|0 |1 is obsolete| | Attachment #178906|0 |1 is obsolete| | Attachment #178907|0 |1 is obsolete| | Attachment #178908|0 |1 is obsolete| | Attachment #178909|0 |1 is obsolete| | --- Comment #30 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183708 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183708&action=edit Bug 39045: Add translation context to currency active status This patch adds translation context to the 'Active' status for currencies. To test: 1. Go to Administration > Currencies and exchange rates --> There should be a column with the heading 'Active' 2. Click 'Edit' next to one of the currencies --> There should be a field Active: 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be entries with 'Currency status' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #31 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183709 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183709&action=edit Bug 39045: Add translation context to budget active status This patch adds translation context to budget active status. 1. Go to Acquisitions --> In the table under 'All available funds', there should be a column with the heading 'Active' 2. Apply patch 3. Update translations ktd --shell gulp po:update --lang fr-CA 4. View the fr-CA-messages.po file --> There should be an entry with 'Budget status' in msgctxt 5. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 6. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 7. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 8. Repeat step 1 --> Translation should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #32 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183710 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183710&action=edit Bug 39045: Add translation context to course status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the course status in course reserves. To test: 1. Go to Course reserves 2. Click 'New course' 3. Fill out the mandatory fields 4. Click 'Save' --> In the course details, there should be a field Status 'Active' 5. Click 'Edit course' 6. Uncheck 'Enabled?' 7. Click 'Save' --> In the course details, there should be a field Status 'Inactive' 8. Apply patch 9. Update translations ktd --shell gulp po:update --lang fr-CA 10. View the fr-CA-messages.po file --> There should be entries with 'Course status' in msgctxt 11. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 12. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev koha-translate --update fr-CA --dev kohadev 13. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 14. Repeat step 1-7 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #33 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183711 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183711&action=edit Bug 39045: Add translation context to stock rotation status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the status of stock rotation rota. To test: 1. Enable the StockRotation system preference 1.1. Go to Administration > System preferences 1.2. Search for StockRotation 1.3. Choose 'Enable' 1.4. Click 'Save all Circulation preferences' 2. Go to Cataloging > Stock rotation 3. Click 'New rota' 4. Enter a name for the rota 5. Click 'Save' --> There should be a column with the heading 'Active' 6. Click 'Manage' > 'Stages' 7. Click 'Add a stage' 8. Enter a duration 9. Click 'Save' 10. Click 'Return to rotas' 11. Click 'Activate' 12. Click 'Manage' > 'Items' 13. Click 'Add items' 14. Enter a barcode (e.g. 39999000001518) 15. Click 'Save' 16. Click the title of the item 17. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Active' 18. Go back to Cataloging > Stock rotation 19. Click 'Deactivate' 20. Click 'Manage' > 'Items' 21. Click the title of the item 22. Click 'Rota' (left menu) --> Under 'Rota status' it should say 'Inactive' 23. Apply patch 24. Update translations ktd --shell gulp po:update --lang fr-CA 25. View the fr-CA-messages.po file --> There should be entries with 'Rota status' in msgctxt 26. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 27. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 28. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 29. Repeat step 1-17 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #34 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183712 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183712&action=edit Bug 39045: Add translation context to 'Inactive' as report group This patch adds translation context to the 'Inactive' heading in reports, to differentiate it from an inactive status of something. To test: 1. Go to Reports --> There should be an 'Inactive' section heading on the right 2. Click on one of the inactive reports --> There should be an 'Inactive' section heading in the left menu 3. Apply patch 4. Update translations ktd --shell gulp po:update --lang fr-CA 5. View the fr-CA-messages.po file --> There should be an entry with 'Group of reports to get inactive patrons and items' in msgctxt 6. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 7. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 8. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 9. Repeat steps 1 and 2 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #35 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183713 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183713&action=edit Bug 39045: Add translation context to API key active status This patch adds translation context to 'Active' and 'Inactive' when used as the status of an API key. To test: 1. Enable the RESTOAuth2ClientCredentials system preference 1.1. Go to Administration > System preferences 1.2. Search for RESTOAuth2ClientCredentials 1.3. Choose 'Enable' 1.4. Click 'Save all Web services preferences' 2. Click your user name at the top right corner and choose 'My account' 3. Click 'More' > 'Manage API keys' 4. Click 'Generate a new client id/secret pair' 5. Enter a description 6. Click 'Save' --> There should be a column with the heading 'Active' 7. Apply patch 8. Update translations ktd --shell gulp po:update --lang fr-CA 9. View the fr-CA-messages.po file --> There should be an entry with 'API client id/key pair status' in msgctxt 10. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 11. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 12. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 13. Repeat step 1-6 --> Translation should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #36 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183714 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183714&action=edit Bug 39045: Add translation context to ERM data providers status (active/inactive) This patch adds translation context to 'Active' and 'Inactive' when used as the status of ERM data providers. This patch needs the patch in bug 39061 in order to work properly. To test: 1. Enable the ERMModule system preference 1.1. Go to Administration > System preferences 1.2. Search for ERMMdoule 1.3. Choose 'Enable' 1.4. Click 'Save all E-resource management preferences' 2. Go to E-resource management 3. Click 'Data providers' 4. Click 'New data provider' --> There should be a Harvester status field with Active and Inactive options 5. Click 'Create manually' 6. Fill out the mandatory fields 7. Click 'Submit' --> There should be a Status field with value 'Active' 8. Click 'Data providers" --> The status in the column should be 'Active' 9. Click 'Edit' 10. Change Harvester status to Inactive 11. Click 'Submit' --> There should be a Status field with value 'Inactive' 12. Click 'Data providers" --> The status in the column should be 'Inactive' 13. Apply patch 14. Update translations ktd --shell gulp po:update --lang fr-CA 15. View the fr-CA-messages.po file --> There should be entries with 'ERM data provider status' in msgctxt 16. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 17. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 18. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 19. Repeat step 1-12 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #37 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183715 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183715&action=edit Bug 39045: Add translation context to fund status (inactive) This patch adds translation context to '(inactive)' when used for the fund status in acquisitions. To test: 1. Create an inactive budget and fund 1.1. Go to Administration > Budgets 1.2. Click 'New budget' 1.3. Fill out the mandatory fields and the total amount, DO NOT check the 'Make budget active' box 1.4. Click 'Save' 1.5. Click 'Inactive budgets' 1.6. Next to the new budget, click 'Actions' > 'Add fund' 1.7. Fill out the mandatory fields 1.8. Click 'Submit' 2. Create a suggestion and link it to an inactive fund 2.1. Go to Acquisitions > Suggestions 2.2. Click 'New purchase suggestion' 2.3. Fill out the title 2.4. Under 'Acquisition information', check 'Show inactive' 2.5. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 2.6. Choose the inactive fund 2.7. Click 'Submit your suggestion' 3. Create an order from new file, link it to an inactive fund 3.1. Go to Acquisitions 3.2. Click 'Search' under 'Search vendors' 3.3. Click 'Add to basket' next to 'My basket' 3.4. Click 'From a new file' 3.5. Choose a MARC file (I attached an example if necessary) 3.6. Click 'Upload file' 3.7. Click 'Stage for import' 3.8. Click 'Add staged files to basket' 3.9. Click 'Default accounting details' 3.10. Check 'Show inactive' next to the fund dropdown 3.11. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 3.12. Choose the inactive fund 3.13. Click 'Item information' 3.14. Fill out the 'y - Koha item type' field 3.15. Click 'Select to import' 3.16. Check the 'Show inactive funds' box 3.17. Check the box next to the record 3.18. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 3.19. Enter a price 3.20. Click 'Save' **Note: there are 5 occurrences of "(inactive)" in that page, but I only found those two...** 4. Create a duplicate order 4.1. Click 'Add to basket' 4.2. Click 'From existing orders (copy)' 4.3. Search for the previous order 4.4. Check the box next to the order 4.5. Click 'Next ->' 4.6. Check 'Show inactive' next to the fund dropdown 4.7. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 4.8. Choose the inactive fund 4.9. Click 'Duplicate orders' 5. Create an order from an empty record 5.1. Click 'Add to basket' 5.2. Click 'From a new (empty) record' 5.3. Fill out catalog details (at least the title) 5.4. Fill out the 'y - Koha item type' field 5.5. Check 'Show inactive' next to the fund dropdown 5.6. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 5.7. Choose the inactive fund 5.8. Enter a vendor price 5.9. Click 'Save' 6. Close the basket and receive the orders 6.1. Click 'Close basket' 6.2. Click 'Yes, close (Y)' 6.3. Click 'Receive shipments' 6.4. Enter a vendor invoice number 6.5. Check 'Show inactive' 6.6. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 6.7. Click 'Next' 6.8. Click 'Receive' next to an order 6.9. Check 'Show inactive' 6.10. Open the 'Fund' dropdown --> There should be your budget with (Inactive) next to it --> There should be your new fund with (inactive) next to it 6.11. Choose the inactive fund 6.12. Check 'Receive?' 6.13. Click 'Confirm' 6.14. Click 'Finish receiving' 6.15. Click 'Show inactive' next to 'Shipping fund' --> There should be your new fund with (inactive) next to it 7. View Orders by fund report 7.1. Go to Reports > Orders by fund 7.2. Check 'Show inactive' 7.3. Open the 'Fund' dropdown --> There should be your new fund with (inactive) next to it 8. Apply patch 9. Update translations ktd --shell gulp po:update --lang fr-CA 10. View the fr-CA-messages.po file --> There should be entries with 'Fund status' and one entry with 'Budget status' in msgctxt 11. Optionally, translate the strings (remember to remove the fuzzy flag, if any) 12. Install new translations ktd --root --shell koha-translate --install fr-CA --dev kohadev 13. Enable the new language in Administration > System preferences > StaffInterfaceLanguages 14. Repeat steps 1-7 --> Translations should be whatever you put in the po file Signed-off-by: Owen Leonard <oleonard@myacpl.org> -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #38 from Owen Leonard <oleonard@myacpl.org> --- Created attachment 183716 --> https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=183716&action=edit Bug 39045: (follow-up) Fix spacing Adding some whitespace to the markup so that the "(inactive)" has a space before it. -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Owen Leonard <oleonard@myacpl.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|Patch doesn't apply |Signed Off --- Comment #39 from Owen Leonard <oleonard@myacpl.org> --- (In reply to Lisette Scheer from comment #29)
Moving the vendors into vue means this won't apply anymore as one of the patches is trying to update a file that no longer exists.
I've rebased and re-attached the patches without the vendors one -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Bug 39045 depends on bug 39061, which changed state. Bug 39061 Summary: Allow translation context in vue files https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39061 What |Removed |Added ---------------------------------------------------------------------------- Status|Needs documenting |RESOLVED Resolution|--- |FIXED -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 --- Comment #40 from Jonathan Druart <jonathan.druart@gmail.com> --- 2 possible errors (I didn't test): 1. There is a mix of this.$__p and __p in "Add translation context to ERM data providers status (active/inactive)" 2. [% SET optgroup_label = tp("Budget status", "{budget_description} (Inactive)", {budget_description = budget_period.description}) %] I think you need tpx here, tp takes only 2 parameters. Note that "Bug 40743: Fix description of inactive budget" is going to conflict with 2. -- You are receiving this mail because: You are watching all bug changes.
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=39045 Jonathan Druart <jonathan.druart@gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|Signed Off |Failed QA -- You are receiving this mail because: You are watching all bug changes.
participants (1)
-
bugzilla-daemon＠bugs.koha-community.org