October 2016 - Koha-devel - lists.koha-community.org

log file of activities for admin of koha in the library
by rania azad mohammed 18 Jan '17

18 Jan '17

Dear We are 3 admins in the library working on shifts in the library, each of us log-in during her time. I want a report or log file to see all the activities of each admin during a specific day. is there such report or file? I tried to find it using the wiki but hopeless -- *Regards,* *Rania Azad |* Library Manager Library Department http://library.auis.edu.iq/ The American University of Iraq, Sulaimani Office: *B-G-32* Ext *1219*

7 13

FYI: yaz-client limitations
by Tomas Cohen Arazi 12 Jan '17

12 Jan '17

Barton told me it could be useful to share this excange I had with IdexData people during the implementation of the Zebra facets. It highlights a limitation on the yaz-client tool, and they suggest we better use zoomsh. I'm not sure if I already posted this on koha-devel, but it doesn't hurt to re-post, and might save some people some hours and headaches. Regards ---------- Forwarded message --------- From: Adam Dickmeiss <adam(a)indexdata.dk> Date: lun., 9 mar. 2015 a las 6:36 Subject: Re: [Info] Possible limit on the amount of specs on an elementset? [ZEB-663] To: Tomas Cohen Arazi <tomascohen(a)gmail.com> Cc: jira(a)indexdata.com <jira(a)indexdata.com> On 03/02/2015 12:18 PM, Tomas Cohen Arazi wrote: Hi, I compiled 2.0.60 with the aim to patch it for a problem we are facing, and I can say the problem I previously reported is still present: This a limitation in yaz-client which has a limit of 100 characters for elem command. We'll remove that limitiation. You can use zoomsh instead to play with longer facet specs. / Adam Z> elem zebra::facet::su-to:0:100,su-geo:0:100,su-ut:0:100,au:0:100,se:0:100,itype:0:100,location:0:100,holdingbranch:0:100,homebranch:0:100,tomas:0:100 Z> s 1+1 Sent presentRequest (1+1). Records: 1 Record type: XML <record xmlns="http://www.indexdata.com/zebra/"> <facet type="0" index="su-to"> </facet> <facet type="0" index="su-geo"> </facet> <facet type="0" index="su-ut"> </facet> <facet type="0" index="au"> <term coccur="2" occur="2">Adåker, Ulf</term> <term coccur="2" occur="2">Danielsson, Palle</term> <term coccur="2" occur="2">Stenson, Bobo</term> <term coccur="1" occur="1">Davis, Miles</term> <term coccur="1" occur="1">Löfcrantz, Johan</term> <term coccur="1" occur="1">Milder, Joakim</term> <term coccur="1" occur="1">Öström, Magnus</term> </facet> <facet type="0" index="se"> </facet> <facet type="0" index="itype"> </facet> <facet type="0" index="location"> </facet> <facet type="0" index="holdingbranch"> </facet> </record> nextResultSetPosition = 2 Elapsed: 0.001203 So 'holdingbranch' is the last facet it retrieves. If I thange the elementset like this: Z> elem zebra::facet::su-to:0:100,su-geo:0:100,su-ut:0:100,au:0:100,se:0:100,itype:0:100,location:0:100,tomas:0:100,homebranch:0:100,holdingbranch:0:100 I still get a 8 facet limit: Z> s 1+1 Sent presentRequest (1+1). Records: 1 Record type: XML <record xmlns="http://www.indexdata.com/zebra/"> <facet type="0" index="su-to"> </facet> <facet type="0" index="su-geo"> </facet> <facet type="0" index="su-ut"> </facet> <facet type="0" index="au"> <term coccur="2" occur="2">Adåker, Ulf</term> <term coccur="2" occur="2">Danielsson, Palle</term> <term coccur="2" occur="2">Stenson, Bobo</term> <term coccur="1" occur="1">Davis, Miles</term> <term coccur="1" occur="1">Löfcrantz, Johan</term> <term coccur="1" occur="1">Milder, Joakim</term> <term coccur="1" occur="1">Öström, Magnus</term> </facet> <facet type="0" index="se"> </facet> <facet type="0" index="itype"> </facet> <facet type="0" index="location"> </facet> <facet type="0" index="homebranch"> </facet> </record> nextResultSetPosition = 2 Elapsed: 0.003697 On Mon, Feb 9, 2015 at 5:08 PM, Tomas Cohen Arazi <tomascohen(a)gmail.com> wrote: Is there a way (or could it be) to skip the error if there are elems with results? For facets, it would be great that we could ask for n facets, and retrieve all at once. I'll try 2.0.59 in about two hours and reply. El lun., 9 de febrero de 2015 12:59, Adam Dickmeiss <adam(a)indexdata.dk> escribió: On 02/09/2015 04:51 PM, Tomas Cohen Arazi wrote: It is 2.0.44 on ubuntu 14.04. Should i try a newer? I don't see things changes with respect to facets.. But you could try 2.0.59 out. / Adam El lun., 9 de febrero de 2015 12:48, Adam Dickmeiss <adam(a)indexdata.dk> escribió: On 02/05/2015 11:27 AM, Adam Dickmeiss wrote: Hi Tomas, we'll look into this and get back to you. Please reply-all and keep [ZEB-663] contents in the subject line for future conversation. Hi Tomas, we can't see a limit of 8. Asking for more than 8 returns more than 8. And supplying any non-existing facet-field throws an error. What version of Zebra are you using? / Adam / Adam On 02/04/2015 03:59 PM, Tomas Cohen Arazi wrote: Hi, I've been playing with facets retrieval, which shines in Koha 3.18 (thanks!) One thing I noticed is that asking zebra to retrive more than 8 facets at once doesn't work (it only retrieves 8). What i did was: > elem zebra::facet::a1:0:20,...,a8:0:20,bullshit:0:20 ('bullshit' doesn't exist on the facet indexes) and > f a > s 1+1 shows the expected results. If I do > elem zebra::facet::a1:0:20,...,a7:0:20,bullshit:0:20 It fails ([25] Specified element set name not valid...) Regards -- Tomás Cohen Arazi Prosecretaría de Informática Universidad Nacional de Córdoba ✆ +54 351 5353750 ext 13168 <%2B54%20351%205353750%20ext%2013168> GPG: B76C 6E7C 2D80 551A C765 E225 0A27 2EA1 B2F3 C15F _______________________________________________ Info mailing listInfo@lists.indexdata.dkhttp://lists.indexdata.dk/cgi-bin/mailman/listinfo/info -- Tomás Cohen Arazi Prosecretaría de Informática Universidad Nacional de Córdoba ✆ +54 351 5353750 ext 13168 <0351%20535-3750> GPG: B76C 6E7C 2D80 551A C765 E225 0A27 2EA1 B2F3 C15F -- Tomás Cohen Arazi Theke Solutions (https://theke.io <http://theke.io/>) ✆ +54 9351 3513384 GPG: B2F3C15F

2 1

Zebra: the 'elements zebra::snippet' doesn't work
by Tajoli Zeno 11 Jan '17

11 Jan '17

Hi all, I trying to check my indexes in Zebra. My setup: OS: Debian jessie Koha: 3.20.7 [manual install] Zebra: 2.0.61 [install from IndexData repo] Format: UNIMARC Probably the fact that I use unimarc is relevant but I don't understand where. I do the debug described here: http://wiki.koha-community.org/wiki/Troubleshooting_Zebra#Why_does_a_search… The result of a working search is: Diagnostic message(s) from database: [25] Specified element set name not valid for specified database -- v2 addinfo 'zebra::snippet' but my ../etc/zebradb/retrieval-info-bib-dom.xml is correct: <?xml version="1.0" encoding="UTF-8"?> <retrievalinfo xmlns="http://indexdata.com/yaz"> <retrieval syntax="unimarc" name="F"> <backend syntax="xml" name="marc"> <marc inputformat="xml" outputformat="marc" inputcharset="utf-8" outputcharset="utf-8"/> </backend> </retrieval> <retrieval syntax="unimarc" name="B"> <backend syntax="xml" name="marc"> <marc inputformat="xml" outputformat="marc" inputcharset="utf-8" outputcharset="utf-8"/> </backend> </retrieval> <retrieval syntax="xml" /> <retrieval syntax="xml" name="index"/> <retrieval syntax="xml" name="marc" identifier="info:srw/schema/1/marcxml-v1.1"/> <retrieval syntax="xml" name="marcxml" identifier="info:srw/schema/1/marcxml-v1.1"/> <retrieval syntax="xml" name="zebra::*"/> </retrievalinfo> Do I need to check in other places for the setup of ' zebra::snippet' ? Bye Zeno Tajoli -- Zeno Tajoli / SVILUPPO PRODOTTI/ - Automazione Biblioteche Email: z.tajoli(a)cineca.it Fax: 051/6132198 *CINECA* Consorzio Interuniversitario - Sede operativa di Segrate (MI)

5 13

INSTALL.debian is outdated
by Jonathan Druart 27 Nov '16

27 Nov '16

2015-11-11 22:37 GMT+00:00 Robin Sheat <robin(a)catalyst.net.nz>: > Aparrish schreef op wo 11-11-2015 om 08:13 [-0700]: >> I followed the official instructions: >> http://git.koha-community.org/gitweb/?p=koha.git;a=blob;f=INSTALL.debian;hb… > > We need to delete those, they're from 2012 and are super out of date. Shall we 1) delete them, 2)replace them with the content of the wiki page or 3) just put a link to the wiki page?

12 23

Uploading circulation related Data to Koha. Help required.
by G.K.MANJUNATH 24 Nov '16

24 Nov '16

dear All, We are experimenting with data migration from our existing library software to Koha. We could successfully transfer the bibliographic data ( .mrc) after appropriate conversion and also the patrons' records with photos. However, one important job remains unfinished. We have downloaded circulation data in Excel format and trying to upload this to Koha. We do not know how to go about it . I very appreciate your help : 1. Is it possible to directly upload the circulation data stored either in a MS-Excel file or a text file? * We have 5 fields - date of transaction, Patron codes, barcode numbers, date of issue and due date. ( Will be converted to tab separated file if required ) 2. If not, is there any way I can convert the circulation related data stored in Excel or text file to .koc format so that it can be uploaded to Koha using the utility developed by 'Bywater solutions'. 3. What is the structure of .koc file ? Can any one please send me a .koc file with few sample records in it ? From my understading it is a simple text file with fields separated by tab. Any input in this regard is highly appreciated. thanks in advance, G.K.Manjunath Chief Librarian Indira Gandhi Inst of Development Research Film City Road Santosh Nagar Goregaon(East ) MUMBAI - 400 065 INDIA

3 4

Create autocomplete for addbiblio.pl
by Rodrigo Santellan 01 Nov '16

01 Nov '16

Hi, I'm trying to create an autocomplete for a few fields when adding a biblio. My problem so far is that the ids generated are things like this: *tag_110_subfield_a_361770_300725* (I'm trying to create an author autocomplete). One quick fix for me will be to add to the fields a class containing this: tag_[% subfield_loo.tag %]_subfield_[% subfield_loo.subfield %] Should this will be helpful to anybody else? Is there a better way to do this? Regards

3 3

Creating new template.
by Rodrigo Santellan 31 Oct '16

31 Oct '16

Hi, I want to create a new template for a custom action in the patron details. What I need is to call a web service to update some data of the patron but only is the staff wants (Ideally it will be called on a cron job at midnight). I have two languages English and Spanish, do I need to change both views of the *koha-tmpl/intranet-tmpl* or should I change the English one and the regenerate them? Thanks for any help! Regards Rodrigo

3 8

Bug 16733 and related
by Marcel de Rooy 31 Oct '16

31 Oct '16

Hi all, This bug (and various connected ones) is about making changes in the Debian scripts that make life somewhat easier when you decide to use git on a package install. I realize that this is a somewhat controversial area. Several people do not want git near the Debian installs. I understand their concerns in terms of safety and keeping etc in sync with Koha (to say it shortly). In terms of safety you should indeed protect your staff client (iptables, rewrite rule like bug 16922?) For a production install you should probably only use git to manage custom patches on top of your Koha install. Currently, this bug is just silently ignored. Although more people than just me use gitified package installs (especially for testing). The current approach on bug 16733 may not be the most optimal one. So, I am just triggering the discussion here. How can we go further with some more consensus here or should I just obsolete this line of development ? Thanks for any feedback, Marcel

2 1

Koha Community Newsletter: October 2016
by kohanews 30 Oct '16

30 Oct '16

Fellow Koha users: The Koha Community Newsletter for October 2016 is here: https://koha-community.org/koha-community-newsletter-october-2016/ Many thanks to the folks who submitted articles and news to this month's newsletter. Please feel free to email me with any corrections or suggestions. Thanks! -- Chad Roseburg Editor, Koha Community Newsletter

1 0

Development environment ,
by Karam Qubsi 29 Oct '16

29 Oct '16

*Hi , * I hope if some of you can share what tools you are using to make it easier in developing koha code . Recently I tried to implement koha development installation using vagrant ( https://www.vagrantup.com/) as I loved the way it works with Laravel homestead but I think something was not working with me for koha ( did any of you try vagrant with koha) let's say I have my PC and I have a windows on it , and I have a virtual machine with Debian and koha dev installation . I want to edit koha code from my windows machine using my preferred IDE and then simply from the virtual machine terminal applying patches or commit some changes . is there any way to get it easy like this ? , *Many thanks . * -- *Karam Qubsi*

8 19